tomcctv

Hi. That is not a budget ..... ptz cameras are already housed..... making a housing is just a waste of time and money Using a pic points to you using a ip camera. Budget is too small

Hi. You can't turn old into new with firmware. You can't use hik-connect with that recorder. It will be easier for you to setup with an other DDNS service.

Hi. Why indoor camera then make a enclosure for it ? Who owns radio transmitter....... not a good idea if not owners Hi zoom plz ..... what is your budget

Hi lorex link is a dahua

Hi. Why buy something so limited Only 3mp on first 2 and only 2mp ip There are other hik that do 3mp tvi on all 8 Why give your system a restriction

Hi. You need to switch off Dmz on your router never leave that open. Go to network on your recorder and find its local IP And add that to the iPhone app Did you first set up your system with the p2p .... Barcode

Hik have done away with hiddns...... Gray market and copy units could connect with it........if you Re registered before Feb 2017 with real hik to hik-connect then it would be fine as long as firmware update is done as well ........and you can't put the new firmware on copy or OEM eBay and the likes are now full of hik that will no longer take updates. Amazon are now in control of hik-connect DDNS services

Hi your DDNS is linked to Eircom Limited So that's ok. I will pm you a new DDNS .... Can't post it on here but you will understand were t is from

Is the botnet or virus or whatever on my dvr or is it in the ddns? You don't have botnet...... it will be something from your ddns and since it was setup by someone else there could be others on the same account

Pm me the dns settings. I just want to see what type It's going to be deleted anyway as I will give you a free secure ddns that only you will have control

You can list the ports And all dns

Hi. Can you send me your units serial number from the underside. Also post the IP from far east

Dyn is a ddns service Who set the port forwarding for you ?

Hi. It would be better just to match and replace the old one.

Hi no you don't need a new dvr .... you also don't have a static ip from your internet provider First thing you need to do is remove your ddns account Did you set up the ddns or someone else ? Who is your internet with ?

Hi. Why use a ddns if you have a static Bots don't re wright. What ports are open on your router

Hi. It is very unlikely as the 5 year old does not have p2p... it was manual setup. Also black listed ip does not point to your isp. That still changes ... it's the ddns service that gives and holds your ip. Who is your internet with ?

One that does not get sick

Yes your unit should startup ... a bad hard drive can stop it. And it does no harm removing it

Hi. A much better system is this and in your budget .... It is the dahua system ..... Stay with IP cameras if you are installing yourself this system is full POE ... Everything down one cable to each camera https://www.lorextechnology.com/hd-ip-security-camera-system/hd-security-camera-system-with-2k-recorder-weatherproof-cameras/LN10802-84W-1-p

Hi. Your link IS NOT A HIKVISION and you will have no support from hik at all. And you can't use hikvision software.

Hi same thing ..... how many times do people pass camera each day Any change in view adds data ....... it is normal

No am not hard on you.......shanzen products are cheap throwaway crap. .... No support ..... As you have found out Phone call to tech ...... Costs more than what you paid for NVR Sending unit back ...... Costs more than what you paid for it. You also need to understand firmware. ...... No firmware update for your unit. Firmware is a way to alter or add to the NVRs existing software...... You can't add another's firmware ...... Just as you can't remove and add better software to your unit. And you have ignored the 5 ports that you have allowed past your firewall and any antivirus you might have on your network .... And there always going to be open ...... Why have your internet linked to a China server. But for your original post you will find you will have better control of your cameras including motion if you link cameras to a switch then to NVR.

Hi. Have you started dvr up without hard drive

I expected another answer. An answer like 'you can use an alternative firmware such as this one ...' Thank you for your participation So you buy cheap crap and expect to use a better software Let's see what $24 has got you ......... Did you check the auto setup for remote view ......... Auto opens 5 ports that you have no control over ..... Punches hole past any firewalls and you have no clue were your data is going .....not just from your NVR but everything on your network. The sad part is even if you replace your cheap crap ..... The ports are still open and attached to a China server....... Full router reset and IP change.