tomcctv

Hi. Avermedia has no licence fee

Hi. To make your job easier ...... Like ssnappier says forget mag locks otherwise you are looking at two controls to figure out ..... Existing door control and new mag control. Also with the many types of card locks on the market .... Cut down the work and talk to the hotels room door lock company and see if they do external lock. Also with it being a major hotel then I would say you need to involve fire alarm company ( doors must unlock on fire alarm)

Hi. From what I read ....... Your install is a supermarket . So motion in that application will be classed constant record ( at least in open hours) so you need to calculate as no motion. As far as switch ...... You have one area 24 cameras on one switch ..........that is a lot of cameras to go down if that switch has a problem.

Hi . Reading this post it looks like a lot of mistakes. First why look at motion detect ?.. Use more switches. Also need distance of cameras

Hi. Depends if the recorder has alarm options ........ If your going direct to recorders interface it will show alarms ....... If unit supports it

Hi. You will need to take into account pre and post recordings. It works well when recording I.e 5 seconds before and 5 seconds after event will also be added to recording. Sounds like you are only using snap shot So you will need to set pre alarm to 0. (Factory set to 5)

I do wish you would put that stuff out of your head. Your system is not on the net. But if it was your system logs IP addresses I would turn the sunsheld around on your camera And also give your recorder time to finish the file before you view And see how that goes for a few days

Take a look at pictures .......... ITS IP ........ FORGET ANALOG

7 pages and it was sorted on page 3 Yout recorded files are missing because you viewed before files were written. Laser ........ Your camera is reflecting IR from sheld and everything white around it. You have a swann 720p hd system and also your not on Internet so no one can connect

Can you take a picture of the back of your dvr Also you have something wrong with your recorder 1st is the time display ONLY on cam1 is it 2 seconds a head of rest of cameras. 2nd you have multi screen high lighted at bottom of screen but on screen it says single camera

Hi. New products are protected by patent...... Protects them for first year or two That's when a company makes its money ...... Being supplier Usually it's over a year before a company would allow another company to also us that platform. And that's done by way of a licence . Dahua have granted licence to USA Based Exar

Then it was not being erased......... You need your footage to be filed by your dvr Swann puts footage into files of 20 mins long. Each file then is given time date If you view footage before that footage is filed it will not be filed. Plus some swann and avtech when you go into footage the dvr will stop recording. Ok your cameras are outside ...... Are they anywere near you hvac outlet or any other outlet with heat ?

No it's not a good tread it's been taken over to which no help at all can have a outcome. neighbours ..... Flowers ..... Guns

Like I said before it will be much better if you leave your Neighbours out of trying to solve your problem. You have been asked some basic questions but not answered any. It's your system Is your camera near anything outdoors Are you going stright to your dvr and viewing your footage as soon as you have a problem.

That's an old ISP not heard in a long time XLN (budget business broadband). Check your dvr IP with the one you have directed to on router Also subnet

This is a cloths dryer problem

Hi. Without seeing pictures or footage it's hard to tell. But it's best to leave anything to do with your neighbours out off what might be happening with your system.. Some budget systems like swann avtech cnm. Have a store then save footage I know the old swann and also the avtech record in blocks 20 or 30 minutes. So it has to record for that length of time and then it time stamps. And stores Now if your watching your dvr seeing an incident and going to your dvr and rewind to watch before it has saved then it's lost. Give your dvr time to log and save ..... Leave for an hour before you go view footage. Lasers. ....... If it's happening you can do some easy tests First lasers are not invisible light you should see a red or green dot on your camera lens from outside just looking up at it. Second . You can buy smoke in a can ( spray can ) at night walk around your home at night spray smoke in camera area and again you will see laser light (as a beam of red or green light) But again put neighbours with laser out for a minute and look at what else can be giving you the same effect. Hoax systems ...... Cloths dryers .... Gas heating systems can also make you think your cameras are being blinded by light. And this happends at night or early dark mornings ( like times you say having problems) Have a look at your camera placement see if close to any heat outlet.

Use dahua cloud service

Hi. It sounds like your just making it difficult for your customers. And you. I understand cloud storage but don't understand why you would want new viewing software for your customers

Hi. You only need there PSS software

But also take into account warranty ...... Does it come with hard drives If you have problems how much is it going to cost you

You Might be a bit late ........ It's called Cloud.

Sounds like your a agent Is the job yours ????

If the words Washington were same size letters then it would Is it not the licence plate number were talking about ???

If the letters were same size of licence plate then yes you would. Move away from your state say an area with red on white or blue on white or black on yellow are you saying there is no chance of plate capture ??? Get yourself a geovision