-
Content Count
11,833 -
Joined
-
Last visited
-
Days Won
134
Content Type
Profiles
Forums
Calendar
Everything posted by tomcctv
-
port forwarding - BT fibre to Orane brighbox to NVR
tomcctv replied to smcctv's topic in Computers/Networking
Hi. Bit of a sales pitch from BT They call if fibre but it's only fibre from exchange to sub and from sub station to home it's on copper. ( hight speed adsl) So it is just a matter of port forward. Orange (EE) can be expensive if your customer dose not have the right broadband pack So check if true unlimited -
Can get an app to Remote Monitor Floureon H264
tomcctv replied to glamrus's topic in General Digital Discussion
Hi. Can you post a picture of your unit and also menu screen -
http://www.netgear.co.uk/home/products/networking/powerline/ Hi. Something like this is your best option. Much better than a wireless
-
Hi. Post is length of time you want camera to keep recording after motion detect
-
Great deal on a DIGIOP Black Camera and Pentax Lens
tomcctv replied to langetelemetrics's topic in Security Cameras
Had left over. More like not up to the job ...that's old -
Can I send HD-SDI Signal over Wireless?
tomcctv replied to Nathanmf's topic in IP/Megapixel Cameras and Software Solutions
Hi like already said yes it is available but it's cost. -
Hi HiFlier. Cameras are ok but dvr is a let down ..... Too old and low storage space. Just do a direct swap Ge for a dahua dvr. Easy set up for you and with 1tb or above lots more footage storage. Also all apps are available on all platforms
-
Hi not on remote ...... As remote is not active till unit has already started. Menu button on from of dvr
-
Hi . Power down your unit .. Then press and hold the menu button then power on
-
cctv video signal loss... help pls
tomcctv replied to legendryrama's topic in Installation Help and Accessories
Hi. Power supply is too small as aibudo says. With low power you camera will still stay on I.e your IR but then not enough power to run camera 1amp is not enough for a IR camera -
How to Set MAC Address on Dahua IPC-HDB3200C?
tomcctv replied to super20g's topic in Security Cameras
Yes, there are major packet collisions and latency problems on the network with both connected, resolved by having only one online at a time. Hi should have no problems with both having same mac Just give each a different IP address and also different port numbers -
hi is this with internal or external IP address default is admin admin
-
Hi. Some units allow to schedule time of either camera or audio or both Or just remove mic from camera
-
Like already said once flashed wrong that's it Are you pal for your area ?
-
QVIS - remote viewing set up problems
tomcctv replied to Artus's topic in Installation Help and Accessories
Hi. Just ignore norton ..... Switch it off then load then switch it back on If we all took notice of norton we would not switch PC on -
Is it the cortex hybrid you have
-
Sounds like you bought from 3rd party Qvis will not support end user . What is the problem with your NVR
-
Just swip bottom of screen then PTZ controls App has always done both
-
Please Help or Give Advice for 64 IP Camera System
tomcctv replied to videocheez's topic in System Design
Why confuse things ??? Warranty from Microsoft ??? List your product -
Desktop Software to Replace VCR Type Tape Recorder
tomcctv replied to iceeyu's topic in Installation Help and Accessories
Hi your best option is to look for a 16 way DVR -
Please Help or Give Advice for 64 IP Camera System
tomcctv replied to videocheez's topic in System Design
If your up against other installers and your going dahua route then you have a problem from the start NVR you have listed will not run 16 x 3mp Going for a job that size with out knowing specs or getting contract and finding out later it can't do the spec But look at another option ........ You want to use dahua and two lots of software ............ Is it not best to keep it all at one That saves money -
WD Announces Purple Surveillance Line
tomcctv replied to varascope's topic in General Digital Discussion
Wow WD enterprise system don't use purple ???????? They did a complain like this when the brought out the green drives. Desktop drives vs. surveillance-class storage You wouldn’t use a bicycle to transport cargo across the country because it’s not the right tool for the job. You also shouldn’t use a desktop hard drive in your surveillance security system because it wasn’t designed for that application. WD Purple surveillance-class storage has been tested to be compatible in a wide-range of security systems. These drives are designed to replace standard desktop drives that were not designed for the harsh 24/7 always-on, high-definition surveillance environment. Desktop drives are built to run for only short intervals and are not engineered to withstand high-temperature fluctuations and equipment vibrations found in a typical surveillance application. So we all must of got it wrong using standard drives for over 20 years -
Help with a Survelliance System installation quote
tomcctv replied to hulio82's topic in Security Cameras
Hi. Cost is too high in your quote And the main problem is installer is using lead kits Which are never good and have a short life time so look at spending more in 12 months Over 2k and can't put BNC on cable ... Is a walk away from quote -
Not far from there and it's a house ........but base is in china But your right even if they make all THERE cameras in the toilet Must be a good buy ....... Quality control I would not even like to think about
-
Hi it's only available if unit is bought from a distributor same with dahua cloud
