tomcctv

Hi first I would spend a few days on forum before you buy anything. Things to look out for is first your NVR ....... Not all NVRs support all cameras so that can be a cost mistake.. Is your system for home or business . And why only 1mp

Also depends if wall is just for visual or include in the software alarm screen

Foscam just a waste of money .....you will spend more on install Foscam yes cheap but also not MP so why not still keep costs down and go analog at each location That will save you more money than Foscam Use all the same DVR at each location and few each at another remote location or on any system installed Add up Foscam then network then storage ........dvr is low budget yet better image that Foscam

Business address is a two bed house ........ Where do they make them ...... In the kitchen

Hi pre made your only basic fix are screw bnc ......you can pic them up from ebay

ACTi are allowing them self to fall behind Basic ip cameras while others have moved on with camera extras Auto focus / Eptz / pip / long range IR Have been on lots or other brands for a while

I can not see how your photo and link are the same Your photo is of a 8 wat TVT pigtail. Which you don't get on dahua Also if you have a dahua it would say on start up Which software are you using for remote.

Both units you say it is are dahua And your picture is not a dahua I sent link to your pm If your having problems with unit why just post sales links. ???

Hi. Link sent by PM

Hi. Set at least 8 of your cameras to D1 then it will allow you to add 32 cameras

Hi. For £30 there are fittings around You could also add connection box for connections

Hi. All avers SA /NV are duel monitor Sounds like you only have built in graphics ( which is only used for second monitor) for emap - playback - if used But main OSD needs to be from a added graphics card

Seems like a lot of work for nothing. Also ..... How would the camera stand up to electronic signature or watermark. No point if they show up as tamper.

We had the ACTi E97 last year.........no way is it a true 10mp It was on ACTi stand at ifsec and it was a camera that people could not understand why. It can't do 10mp video it can only do 30fps at 2mp 10mp was just snapshots in MPEG or 2fps But side by side any other 2 or3mp it was nothing better But worse is a fixed lens ....... 10mp with fixed lens is just pointless ACTi must also see the problem 10mp cheaper than there own 2mp

Aver does but not on there budget Linux units NV/SA/touch. Are windows based The nano is even limited on there own CMS gold

Hi. With a power cut I would look at your camera power supply first. As far as firmware update ..... I would hold off from doing that just now as that unit will need two updates .........you will damage it not going first update then second update ..... And the software HAS to be PAL

Bar ??? If and it's a BIG if,..... It might be possible but only by a special company. And just for them to try you are looking at. Big money And you pay if it can be done or not. You have to understand you are looking at footage from 5 years ago. That makes the system at the least 5 years old or by know it could be 10 years. The make and age and what format will also be a big problem But what you are not understanding is a hard drive has a life limit and are replaced. Or in Manchester police used to take hard drive out of a dvr and insert a clean drive. There is two other options you could try. .... But PM me and I'll give you those options

You can find that type of connector anywhere ....... But if you need one quick Take a look in your photo ....... In parts bag Top right of image

Hi. Are you using the free gdmms lite ??? The lite was updated in middle of January and push is not available On free lite now.

Hi. Port you need to forward is 37777

That is what you have ..... A Dauha nvr

Hi. First install your camera outside house leave to run and record for 12 months As far as remove battery and connect eithernet ....... How what to which software ....... What format

Hi. Without rs485 plug then your unit is called thr avtech lite (connection cable is extra cost) Orange/ black is + A Red / black is - B Transmit is from 25 connector

hi. on that avtech the 25 pin does not control a ptz to the right of that you should see a rs11 socket. this is your ptz control red wire is A or + and green is B - or pin 3 as A and pin 4 as B

Hi in your pm