tomcctv

Hi. Buying from ebay and the likes you will find out of date units The qvis you have listed is the old dahua lite cheapest they do and over prised on ebay. What is your budget

i would go with qvis ...... not the other no name you have listed hdmi or VGA does not matter

how are you testing external IP ...... in some cases you cant do it on your own network

hi. once you installed new H/D did you go to format in setup

Hi. jong143 your first post is two cameras down second post is 6 cameras down. you might be better giving install details how are each powered are they all on same switch did all go down at same time can you connect direct

It goes from dome camera to box with 50mm lens The target from camera to object is only 12inches Any lens will to Take a look at your pm

It also says this in link Product Description Materials: Plastic and zinc alloy or copper Short line equipment Adapter uses coaxial cable convert to camera CCTV BNC twisted-pair (with no balun) No electrical tap, splicing and crimping, but only a small screw driver Coaxial cable have a better capacity of resisting disturbance good transmission quality energy-saving, high reliability and easy to assemble

THEY ARE NOT BALUNS they are just BNC Connector, BNC Male and Screw Terminals. for DIYer who does not have BNC tools. pos is video Neg is nutral (or earth)

Hi no CMS gold will not work with milestone Licence for milestone will be a lot for 24 cameras Where are you located ?? We have 120 lilin mix of analog new 2mp and old D1 with PTZs along with sunkwang and CNB ip

Hi. No you will end up having same problem with hikvision. Liliin also use there own ptzrotocol Are you looking to replace everything and just run on NVR Avermedia NVR will do Regarding the PTZ is it ip or standard

Avigilon - Avermedia - Nuuk- geovision- 3logic- milestone Aver is licence free and also Lilian will go with CMS gold which will replace the CMX Are you running all control equipment in the same area also are all cameras standard or do you have any PTZs

Hi there is only a handful of onvif NVRs and software that works with Lilin cameras. how old is the CMX software ???

aibudo check your PMs

ACTi send you a test that is not close to what you need ?????? look at the coin ........ is that clear ????? your target is much smaller. I would go for a box ip will you be using your cameras for anything else

You are going to waste your money buying the acti cameras. And also a camera with IR is not going to work for you

Box type of any camera would be better If price is a fracture then standard analog will also do your needs Are you looking to record and are you looking for realtime ? Your getting told to use 2 -3mp camera ..........don't see the point in you over paying for a dome camera.

Yes you would need a recorder but it is going to be better for you. Box type camera on small tripod is going to allow you to move camera we're ever you want. And as far as IR . For that distance ......... 1 IR bulb will do on a battery

I would forget using the dome from ACTI And go box type HD-SDI. It will be much cheaper for you and as box camera gives you options to use wide range of lens

Hi. can you give some idea on what you will be recording. 5mm to 10mm target from 300mm is this a moving target ??? also IR is not needed for that range

webcam is IP protocol. your link is only a converter for analog to vga ...... allowing you to display analog onto a vga monitor its not a switch you would need a VGA switch before monitor to take your signal from pc (webcam) and signal from your cameras listed to be able to switch from one to another

Hi. Your problem is saying you don't need a dvr. You have two problems with your request 1st you are looking at bringing analog and ip together 2nd is your display .............your webcam is done via pc to get to monitor The analog you have listed will work with converter but you would then need a way to switch from one to another. Ie VGA switch. You will find it cheaper to run two analog and a dvr.......... It's up to you if you put H/drive in unit to record or not but if looking at car park it makes sence Hikvision with two cameras is only £129

In your case the latest firmware will not help ..... Infact it will make your unit slower. You will only run at 7fps if you update. Your problem is trying to run a hybrid .....which it does not have the prosesing power to do. Your setup should be your 8 cameras on the dvr your 4 MP on your nev And then pull them both together with the PSS software As your NVR stands at the moment you are pulling 8 at 25fps And trying to run another 3 x 3mp and 1x 2mp at there full res and fps

hi open in IE then click tools then compatibility view mode then click add on pop up

Microsofts latest update has removed compatability mode from auto to a manual input it used to be in search bar but now its in tools to safe. open dvr in windows go tools the compatability view settings then just press add. that will keep the settings

3 codes to get you to menu have been sent to your PM