tomcctv

Hi that's not a problem with the coded wirless from optex or GJD. both do a standalone unit

Hi. You can take your headache away by using a hybrid and that way keeping analog and ip all on one system

Hi Robin. there are many things to take into account which I think you are missing. first is CCTV is used as evidence and it has to be 100% right. it cant be guess work ..... which is what poor images give. CCTV evidence is also information collection .... police will and would start an investigation if any of the cctv information is 100% and something for them to start work on. Police cant go on guess work (it costs THEM a fortune in compensation) in the UK and soon to be put into effect in Canada CCTV has to be fit for purpose before it can be used as evidence

best pushing one conector though at a time. so only need hole of the size of BNC which is the biggest. a supplier will say anything for a sale. but they look like plastic internal push on dome. best check as if are internal the first bit of rain is going to cost.

Have a think about it ........ Why do you need a hole the same size of power and bnc together ?? Why not just the size of bnc. Cut wires on camera end will void your warranty if you get any problems later. Your cameras look push on dome cover .....are they outdoor rated

Hi. you location idea is a waste of a PTZ. if you look at blue lines your PTZ will not see anything inside the blue. your best location is on light pole far side of pool >>> pool car park area your camera will see more. but you will need to see the law in your state for using a PTZ in that environment. (classed as public)

we don't have any problems with these. ASUS EN7200GS/HTD/256M, GF 7200 GS TurboCache, 256MB, DDR2 SDRAM, Graphics Card also two cards one can only be listed as master

Hi. With the 3008 hc cards you will need to install a good graphics card. It will not work with built in

Is it not easier just to have direct link sent via email with pre and post footage. Having NVR/ dvr or camera sending full video is going to take time

it does .... all you need is a mic and speaker at camera end .... and NVR supports audio

no need to enter anything other than external ip in the aver. also if you use ONVIf compatable cameras then enter nothing in fields and just press search cameras. search cameras =LAN ip camera site = WAN (cameras of site and other NVRs)

thank you. Would also the Shinybow SB3702-BNC work if I wanted to split it 8 times? or Should I not expect to be able to split the signal that much. http://www.amazon.com/1x9-Composite-Distribution-Amplifier-Splitter/dp/B0028RA46I/ref=sr_1_3?ie=UTF8&qid=1379799440&sr=8-3&keywords=shinybow+composite++video+distribution+amplifier+splitter well i will be able to tell you guys in 4 days if it works, because it's being shipped today! hi. yes it will work you can get the 4-8-16-32-64

Hi. you also need to amplifier for the signal 1 in 4 out will work for you. http://www.amazon.com/ShinybowUSA-1x4-Composite-Distribution-Amplifier/dp/B0028R4UG8/ref=sr_1_1?ie=UTF8&qid=1379791280&sr=8-1&keywords=1+in+4+out+cctv+amplifier

Hi. Not a lot you can do when original image is bad to start with. Might be best moving camera to garage area.

Hi. Before you spend more money I would take the time and cost to have your ebay item tested first. Buying mobotix secondhand can be an expensive exercise.

Hi. Any reason why you use segment for video backup. It's just quick shot of video just as snapshot.

Hi. spec wise may as well just install a better dvr and keep existing cameras hybrid that only does network cameras and limited to only 4 x mp cameras. analog side of dvr is only 6fps which uk regulations is low for hotel

Hi yes between Uk and US plates are very different. Uk are reflective and readable for upto 100m. It might be worth you using two cameras your current one for the fly tipping and a black white for plates. You can run 4 cameras from the one coax if installing another cable is a problem. In the uk you should not be funding this yourself there is money available

Hi . Alien. With a UK plate you will not get image using standard IR. But with the distance in your image I would look at covering up your IR. and just see what image you get from the plate without

FwVitu4HaDQ Uu-kbMfmAx0

Hi. you might take a look at the mobotix. you will not need to buy another mac as it will run on your existing equipment. take a look at the T24 http://www.mobotix.com/eng_GB/Products/Home-Automation/IP-Video-Door-Station-T24 also software for your mac will run T24 and other mobotx you can load it free. http://www.mobotix.com/eng_GB/Support/Software-News/MxEasy-1.4.1-for-Windows-and-Mac-OS-X

Hi. your link is just an app. you are going to need a PC to set up cameras in first place. and also to maintain cameras. how many cameras are you looking at installing ???

Hi. Best app for your system is MEye for both apple and android.

that axis is a close use thermal camera. but if this is a sea port then look at avigilon software