tomcctv

Hi. the thing to look for is lettering after model number. between your link and the model number ....... 3204 (which is old) and does not have POE. your link is the new 3208p which has POE

you must know something we don't. there not double at all. infact cheaper than some of the re-sellers who don't give support or don't even have site ftp login.

yes except that price is not right ...... around 200.

Hi. a little 4 way aver NVR will run the cameras you need and also support audio.

IC realtime are the main distributor for dahua always have been. buy from the and you get full support. free DDNS free cloud free software updates direct to NVR or camera wich gives you as a installer better warranty to your customer

Could be looking at doing job the hard way. If it's a hotel it must already have some sort of network in place. Also over the existing coax is fine for ip. But if your looking at putting in cat5. I would talk to hotel owner and suggest full network of hotel instead of all that work for just one camera.

yes it should be simple from DVR.... what make do you have ?

Hi. you have a TVT dvr. also sold under the q-see brand.

not much you can do ........ besides buy another card FROM GEO or go DVR.

you will need a graphics card ..... even with the clone cards

geo software will not run clone cards. might find something on ebay. also if you do have the software that came with the card you also need to install a graphics card.

Hi. geo copy. not much you can do with that besides software that came with it.

so why go and use a crap forum image from a bad ...... sorry very bad adjusted camera .... if infact it is a avigilon

have you not forgot to calculate something ?????

I would go .....camera then switch and NVR to switch . Leave out built in ports all together. Yes you can just temp connect cameras for doing camera adjustment and then reconnect to built in ports ....... But why limit yourself.

Hi. if you run camera into switch first them manual set in NVR then you will have both options. this is the problem with using built in POE ports

traffic land DC ..... its free. also multi users using a PTZ ...... all you will get is a fight on which way camera goes

Hi. price is not bad. the software on the DVR is standard but it will work and give you other options when you control from a PC with the latest PSS software. also the remote cell software has just had an update so I think it has everything you need.

Hi. it is 100% a dahua. upgrading firmware on that model is not that simple. you can only use region settings. NTSC to NTSC or PAL to PAL you cant go NTSC to PAL or other way. is there a reason to upgrade ??

Hi. Yes you have a dahua.

Hi. Avigilon is your best option. this is what there software does best. Avigilon port side or toll road software is whats needed.

Can be just a case of assigning cameras .......do you have card serial number

Hi avermedia will also do what you want. IC realtime use dahua which does not have the functions you are looking for

Hi. the easy way is to go Ethernet over power. 1 unit plugs into DVR and 1 unit into router. http://www.netgear.co.uk/home/products/powerline-and-coax/simplesharing/XAVB1301.aspx#

might all be misprint ok NOW LOOK AT picture of NVR 16 blue led for each camera connected. NOT 32 ..... 16 they never made a 32 in that case which is called the lite. its not the picture that's wrong its not the spec that's wrong ITS THE HEADING we sell all dahua