tomcctv

hi. firefighter. you have the Apolo at the moment with good cameras. [imghttp://www.cctvforum.com/images/imported/2012/02/182763_10.jpg][/img] i would go hybrid... and still use your existing system. yes you are right with a good wide lens 3-or 5mp can replace a few analog cameras. and you can also lower your FPS to help with storage.

hi. some 2 wire will only see the mac addess. look under attached devices and unplug each dvr to find its mac. then give each dvr a rule and then i.e dvr1 then direct dvr1 to a port.

Hi. yes it can be done but you will need to spend a little. you can use a PTZ programmable controller and i would also look at one that has alarm inputs just like your dvr so as while it is doing your timed location it can still react look for a controller with schedule proramable settings.

remote viewing on what ??? you dont neet any quicktime plug-in. which software are you using and which apps

salesmen................ your spec ......- 1 Ch. D1 / 7 Ch. CIF real-time recording or CIF real-time and 8 Ch. CIF is the lowest ....... no need to go that low anymore most will do D1 on all

hi. how many cameras do you have (ptz) as well as baud rate and protcol you also need to give your camera an address number. if you just have one. try pressing 01 on keyboard and then see if you have control

hi VSI are more of a plug and play unit ...........most people have problems if the registers com ports are not open.

hi . it depends on which DDNS service they used (who has control of it) but for now if you go into your dvr --setup then network you can then see which IPs are using your system. keep your IPs for PC and smartphones and block the rest.

Hi. AV and green drives are always a problem with standalone units. Stick with standard drives.

UWBkuV8tX64

Hi. Some problems with your post. NVR is used with IP cameras and not analog. ... Yes you can convert with encoders but its a cost you don't need.... It might be best if you start with your budget and type of area you are installing at. Also good if you give camera distance from recorder

Hi. using IR cameras will be a waste of time. you need a good true day / night camera. we use DBM-20VD/DBM-21VD from CNB. it has a adjustable change over so you can set for lighting conditions.

Hi. which cameras are you using. this is a limited hybrid........... if you use 8 x 1.3mp cameras you can only record in D1 which is a waste of the true cameras resolution if your no using MP cameras then have a look at a standard DVR its much cheaper

hi. the lead your looking at is a local test setup lead. nothing todo with connecting to your dvr.......... the camera comes with BNC plug in. (which you cant see in picture)

hi. it is possable but some things to look out for before you spend money. DIN systems are old so they will be poor quality cameras or even B/W only. also the power for these systems to camera was 5 to 8v. cameras now are 12/24v so you will have problems powering them. if you want to try using your cameras you will need to take a picture of camera and also take one apart and take pictures of inside so we can workout a rewire for them to work. you can try and see them working first before you buy a dvr.

Hi. your spending alot on cameras i would also spend a little on a power supply the problem with using a multi pig tail is if you have a problem with 1 camera or with your power supply it will take your system out. go for power unit for each camera or buy a multi box supply.

Hi. in your software you dont have camera active selected. you will need to tick this for all your cameras. also with not seeing a red glow from camera IR. this should only be noticed at night time. or you may also have a power problem.

listen if you post something please expect a answer................. and were you get the HATE from is your problem. aver has been minimized by just hitting windows button for 8 years its nothing new. and NO you dont need to enter password. its something thats free for any use. also the same with CM and CM3000 gold and webviewer

Hi. Or just hit the windows button on your keyboard does the same thing.

hi. nv will either work or not. you have a simple fix problem. 1. go into system 2. go into camera settings then you will see analog or IP settings. make shure all cameras are set to analog

HI all POE switch built in.

hi RF and Scart are two types of connection. if you use a modulator then you cant plug into scart are you using existing coax (arial wire) or have you run new coax to each tv from dvr location ??

Hi why do you need to change Mac address.? It depends on your system. Which unit do you have

hi. it also depends on the value of stock getting stolen. in cost alone running cable 10inch apart for the full lenth of fence is going to take some work. if your budget allows look at something like this. http://www.detection-technologies.com/ with extra bonus of being able to protect walls ...... no power needed. zDUQ4eBlsBs

Sentient / swann /cnm there CMS is not the best. you need to give admin rights to the programme files ... but even then you still will have problems go down each file on pc and give each adminisdtrator rights...... then reset up your dvrs and then save