tomcctv

hi. it is possable but some things to look out for before you spend money. DIN systems are old so they will be poor quality cameras or even B/W only. also the power for these systems to camera was 5 to 8v. cameras now are 12/24v so you will have problems powering them. if you want to try using your cameras you will need to take a picture of camera and also take one apart and take pictures of inside so we can workout a rewire for them to work. you can try and see them working first before you buy a dvr.

Hi. your spending alot on cameras i would also spend a little on a power supply the problem with using a multi pig tail is if you have a problem with 1 camera or with your power supply it will take your system out. go for power unit for each camera or buy a multi box supply.

Hi. in your software you dont have camera active selected. you will need to tick this for all your cameras. also with not seeing a red glow from camera IR. this should only be noticed at night time. or you may also have a power problem.

listen if you post something please expect a answer................. and were you get the HATE from is your problem. aver has been minimized by just hitting windows button for 8 years its nothing new. and NO you dont need to enter password. its something thats free for any use. also the same with CM and CM3000 gold and webviewer

Hi. Or just hit the windows button on your keyboard does the same thing.

hi. nv will either work or not. you have a simple fix problem. 1. go into system 2. go into camera settings then you will see analog or IP settings. make shure all cameras are set to analog

HI all POE switch built in.

hi RF and Scart are two types of connection. if you use a modulator then you cant plug into scart are you using existing coax (arial wire) or have you run new coax to each tv from dvr location ??

Hi why do you need to change Mac address.? It depends on your system. Which unit do you have

hi. it also depends on the value of stock getting stolen. in cost alone running cable 10inch apart for the full lenth of fence is going to take some work. if your budget allows look at something like this. http://www.detection-technologies.com/ with extra bonus of being able to protect walls ...... no power needed. zDUQ4eBlsBs

Sentient / swann /cnm there CMS is not the best. you need to give admin rights to the programme files ... but even then you still will have problems go down each file on pc and give each adminisdtrator rights...... then reset up your dvrs and then save

can you post a picture of the front..... it looks like an old hikvision. also if it works (looks like its been at the bottom of a pond with all the rust on the connectors) see if it has PTZ controls on the software. delta wave (hik) does not

hi. It is not a dauha. If the sales man says it is then ask to talk to another. The shang is a 16 way $200 unit and will not work with ANY dauha software or APP and its also new to the market

please dont go by that thread it has nothing to do with your dvr............ not the same unit

at $50 a camera ........ please why is it easier. PSS is free and much better

can i ask why you have gone for a budget unit ........Looking for a DVR with at least the following.. please dont think its anything like a dahua ......... also no free apps (you have to pay for app on every device)

Hi. dahua hybrids are very limited. take a look at the 8ch units ....... 8ch@D1 / 4ch@720P / 2ch@1080P

with a dahua code generator, which is part of a distributers pack........... so you just call your supplier and they will generat a new one for you. on dahuas if you are just locked out...................switch your unit off for 30 minutes and back on again

hi yes car is listed as a PEUGEOT 307 S HDI take the number to your police station........... see what they say...... if nothing see a solicitor

Hi. for that type of connection you would need a modulator before you connect to your labgear.

Hi. I would also take a look at avermedia not in the budget range of the dahua but all are hybrid. And if you are looking to sell as installed systems .......your not going to have the problems of your customers finding the trade price .

so it should be .. no point getting it without.

your best bet is to put your money on the table with which ever supplier you want to trade with....... no point asking for others to give you there discount and costs as there are lots of other factors to take into account. what are you looking at doing...... buy direct yourself or find the profits people make ??

Hi. are you using the right method in I.E to access your DVR. http://192.168.1.100:your port number

RS485 from PTZ to CNB sender (in the same room as operator) then PTZ ontrols are remote..... pan tilt zoom and camera call up and menu. not when you think about it......... This system has to work and it only has 1 chance. the people who have quoted that price may have thought about the size of camera and gone for one MP camera in each room. (does away for the need to be a PTZ) or IP axis PTZ which is small and would do the job you need. if you stay analog then you will have problems with camera being seen.