tomcctv

So this is the inconvenient place of a CCTV camera. May be next time you will use an ip camera. Because an ip camera is more convenient than a CCTV camera and is cheaper too. From asking type if connection you deside best off going IP. .. Just got to love it

wireless to your TV ??? just buy a modulator and put it back into place. you will then see camera on all TVs. looking at your picture you have coax distribution around your house. wirelessly. with your links is a waste of money (cheap and low range)

Hi. yes its just a standard camera. with having a F connector it may have only been used for live viewing. just connected to a modulator then into your TV distribution (which is in your picture) but the last owner may have taken the modulator. are you looking to record with this camera ??

its still theft.

anyone involved with clones are bad for the industry and the innocent people that spend hard earned money

somethings not righ. either you have a mistaken dahua 1.3mp (which still should give you a better image) or your lens is out

Hi. yes it does support dahua cameras. and yes the nanos only support 4 ip cameras but its not as limited as the dahua

Hi. PeteCress sorry i cant tell you the camera type. but the software used is easy and will work with your software. free download link sent via PM.

hi. found 3 .... 2 clear and 1 gold. i will take pics tomorrow with sizes for you to check. if they are the same which they should be as that ptz is still made today. i will let you have the 2 clear for nothing.

do you think so. ???? your link // hong kong / cheap fixed lens / not a day night / lucky if you have warranty (without the high cost of YOU shipping back) and the spec listed has nothing to do with camera. so you will find out $95 is a waste of money. and have to buy another say $95 = $190. or you could buy local and have a demo before you buy and also have a place to return if warranty needed

can you post some footage of this camera

Sunkwang are one of the longest camera manufactures around I will look on Monday to see which spares we have left ... Should have some domes as we replaced some for gold colour

hi. if your under cable runs are not extream then yes 4 way baluns 1 cat5 will run 4 cameras. if you dont have network tools then look for direct connection or both.

Yes always install a dedicated network. BUT THAT IS THE LEAST OF YOUR PROBLEMS lucky someone knows dahua products. you are using a network recorder but your going to use SDI cameras as well as IP ???? not with that recorder also 32 cameras (2mp) with 2 recorders is only going to give you D1 recordings. so your customer is paying for 2mp cameras but your just giving them the next stage up from analog if your going to sell megapixel at least sell products that get you there. infact if you do some work around the forum and look at other IP recording methods you will find better and in your case cheaper. in your setup the recorder is a very weak point.

RS245 ???? or 485. but you just connect both cameras to the same terminals. then its just a matter of giving each camera a address (camera code) cam 1 = 001 cam 2 = 002 and so on.

Hi. is your DVR on line ??

Hi. dahua ip cameras. over a few months old require a firmware update. one of the fixes is RTSP feeds

Hi. dahua are regional. if you have a PAL then you cant use NTSC firmware. dvr needs to be flashed for region but you can set between PAL and NTSC in options in setup

we carry these around as stock. they are much cheaper than getting cables to main TVs. even good snapshot storage with dropbox app

not expensive at all to turn any TV or monitor with HDMI into a android device.

customers who ask for this sort of thing it is always best to say no...... why on earth use covert a normal camera will do the job. or just tell your customers to tell his kids to stop it.

POS is only available on PC based SDI systems. plug and play POS is ok while using analog. but these boxes will not connect with SDI. might be best going hybrid IP then you have two options in line POS box or digi POS

Hi. then your new password has not been given its level. i.e user / admin. go into user setup after you have entered your new account as admin then go to the old password and set it to user. then reboot with new password and delete old one.

Hi. When you crate the new account (master) you then need to delete the old one before you reboot.

Hi yes its a Dahua. in whats called a unbranded case. (standard) found in this build case from the likes of MAC and IC-Realtime