tomcctv

Aventura dont give out software. you will have to contact John or matthew at aventura to register. but if you have just changed cards you can remove the chip from the old card and put it back in the other card you should see it in the top right of the card with writing on it (the only chip that pulls out on card) this has the registration code on that the software is looking for

ended up with it not fingerprint infallibility but humen error. FBI sent a set of prints too 50 states 25% failed to identify them correctly thats a person error nothing to do with fingerprint.

hi you have a Zeus made by dahua .... here is a manual for you. http://www.qvissecurity.com/support/documents/ZeusMK2DVRUsersManualV2.6060912.pdf

hi. from your rs 422 link box (j-box) pin 1 is tx+ pin 2 is tx- run data to RX+ and RX- on each camera

hi. 360 you are better looking at IP mobotix or arecont or geovision. if you are talking analog its best using external detection either using IR sensors or existing cameras to give a command.

Hi Collin. nice demo. talk about the world being a small place ..... i have been to your place many a time. PM sent.

Hi collin. no demo there .......port demo

sorry i thought you ment you got as far as administrator remotely. if you are just getting as far as the login screen then yes your locked out. if you can get someone to login for you at the system (try admin and admin first before you use the code) if that does not work use admin and code and create administrator codes again admin admin then reboot. you can then setup new user accounts at unit or remote.

hi. then its not a password problem you have if your network connection gets you as far as administrator. but yes you can only do it at the dvr. what codes are you using to remote login ???

hi admin is the user name to use with the codes. the Zeus has 3 methods of login. Username: admin. Password: admin. (administrator, local and network) Username: 888888. Password: 888888. (administrator, local only) Username: 666666. Passwords: 666666(Lower authority user who can only monitor, playback,

665600 is todays 092224 to be used 04-26-2012

for todays password 25-4-12 use 665600, tomorrow 26-4-12 use 092224 (both codes will be useless after 12pm on each day) as soon as you are into your system reset codes back to factory then reboot.

VSI is a good unit. first have you had both running on the same register before ??? also how long did you make the extention cable. what make is your register.

hi. take a look at your screen layout first. it all looks mest up. moving cams 1 and 2 will not help your image shows cams 5 and 8 . plug your cameras direct into a TV and see if they both work first

hi . with your dvr set to record motion yes it will do the edge. just dont use motion detect settings.

you do need to do some homework. but go on throw a $3000 into the thread.

you dont have to take it seriously. if you dont understand thats your problem but i will try to explain it better for you. $100 p&s is not waterproof. ...... cant be mounted to wall ..... cant be out in all weathers ....... cant be networked so YES IP will be a little more expensive because of the way it is made (why is that so hard to figure out ???)

it does have alot to do with housings. ok let him stick his $100 10mp camera out in the rain snow heat. it would not last 5 minutes. so add a little more money to his $100 camera. then you need network connection so add a little more money to his $100 camera. software add some more money to his $100 you dont need a calculator to see he needs to spend a little more for a security camera

hi yes same company is ganz UK. they sell them so it might be worth calling torrance and see when or if they will be selling them.

hi. the vario has been available in the uk for over 12 months saw it at ifsec last year. dont know why its not available in america ...... please do not buy from the link you have posted. (please edit) two options. you can order from ganz USA of from a mobotix trading group mayflex. both of which you dont need to worry about sending money too. http://www.mayflex.com/products/security-lighting/infra-red/raytec-vario-i-series-multi-angle-infra-red-illuminators/

hi. you do have that the wrong way round. can your pocket cam send you footage .... can you record away from your pocket camera. ..... can your pocket camera run for more than a hour........ will it last outdoors in all weathers for more than a few months remember your not taking pictures which your camera may do but the video is not 10mp

Hi. yes true but if you only want say 1 or 2 pictures a day or a few minutes of video .... have no networking have no viewing (live) much much more to look into than cost.

on a q-see you have only two options run PAL or NTSC system. pick PAL and yes you need a pal tv (composite out) vga will be ok.

hi. your problem is going to be data. if your cable is buried and cant add extra data then you will need to look at other options. power over coax and then use the old power cable for your data. or remote rs485

you do know that motion detection and motion record are two types of setup. just switch your recording method to motion record (same thing) and then you will also have 5sec pre record motion setup is not for your camera full field its for putting detection zones in the field of view.