tomcctv

hi. the maker is TVT. also known as a q-see DVR. can you post a picture of your dvr ? on there website it now has this warning This DVR cannot be seen on Internet Explorer 9 . You will need to downgrade to Internet Explorer 8. The DVR software is not compatible with Internet Explorer 9.

hi. but PC and card is going to cost you more and is a lower spec. Dahua DVRs are available in SA from many distributors. give this member a PM tesc_cctvpro or click here > ucp.php?i=pm&mode=compose&u=6529 what have i done he might of calm down by now. if not contact him direct on link below. http://tvt-cctv.co.za/index.php?cPath=57_62_61&osCsid=86fa7ecbd4483dec29ca954e59532541

hi. everything is no name. specs are also a bit mixed up. your 8 way is a 4 way card with 4 way extention. (so half what spec says) all the rest are CIF. spend that much on a PC and card. you will get alot more if you buy a standalone full D1 25fps

Hi ssnapier. it depends on the dvr. some will just show 1 camera and some dvrs you can pick and display any camea. most of the time you would use it for say a public display monitor by a door way in a store. or have all cameras switching 1 at a time

Hi john. sorry i have to ask but is your mouse fully working ......... i know it sounds daft but most people only use the left button on there mouse. just right click on your desktop screen and see if you get >>> view / sort / refresh / new. but all avers have had drag and drop with right mouse button in all PC and standalone units for years. what happends when you use imatrix direct on your screen at dvr ...... click on yellow buttom in top right of each image. ???

hi. depends on what you mean by oil pumps ..... is this heating oil ??? nothing to do with if you can use footage in court. what you might be mistaken for is if the installer is registered (electrical code) for installing in a high risk area. are you north or south Ireland. ??

hi. first step would be to pull 1 fuse at a time from your power unit. pull fuse 1 then look at your monitor see if it stops if not put fuse 1 back then try fuse 2 and so on.

hi. it looks like you have a ground problem. you may have a bad power supply or you need to do some new connections on your cameras power and BNCs. looking at your picture it looks as if another image is rolling over (you can see another image at bottom of your screen)

Hi. your lens should just plug direct into your KC4300bk looking at the manual.

hi john. all avers are drag and drop if you have multiple screens you can even drage from 1 monitor to another. in standard screen click on image you want to move and while holding down the mouse button move the mouse to were you want the image then let go of mouse button.

Hi. yes you have 2 options. 1. go to setup then go camera recording then pick cam 3 from the cameras at the top. this will then give you a realtime image of cam 3 with black squires were movment is detected. on the left you will see a slider (motion) turn it dowm till you see no squires. click ok and see how that goes

i would only do a firmware if you need too. remember they dont make your dvr newer . firmware only fixes problems. and DONT use the link in this thead. it is for KPD679ZB you have a KPD679-D if your dvr is working then leave it as it is

hi link sent via PM click download for software.

if your boss is having problems with such a small amount of power used. then just walk away from the job. shockwave199. is right in motion only is not going to save you anything. if you are looking for a unit where the H/drive will go to sleep till your unit detects motion then you have to take into account startup time of HDrive. at which point you will have missed it. $1000 budget ....... for how many cameras ??

hacking a CNB-WCL-21S. nothing to hack. if you need OSD you would have to add a board to the components. and its only a fixed lens camera (what are you expecting from it) is it all worth it for a $60 camera

Hi. going from old to new will also need you to reset some settings. 1st alarms then 2nd you need to go into camera settings (under camera recording) and reset your motion

i can see were this thead is going. we are all talking about 2 differant systems. it is best not to get HDcctv mixed up with HD-SDI cctv. mix and match is available with HDcctv but not with HD-SDIcctv. HD-SDI has been around for some years (small broadcasting mobile units tv industry) and the past few years some companies have tried to bring it into the cctv market. take dahua 18 months they have had theres out but never sold Dm did the same only on the market for 3 months. everyone wanted to be the first but the restrictions on cameras did not make it attractive to the sellers. over the past couple of months we have seen HD-SDI cameras come from lots of camera makers like CNB / sunkwang / everfocus. but none have brought out there own recorder. so it looks like now all HD-SDI cameras are built on the same platform its who is going to be first to release a DVR to go with them. we have had all the new DVR/NVR/ Hybrid and HD-SDI price list from dahua all of which get releast in May but HD-SDI does have 1 problem that the lenth of RG59 / 6 100m

hi. it may also be the reason why your not getting answers here. sorry but what are you going on about. the CNB only has power / and video leads. unless you have the UTP CNB-WCL-21S type. what is it you are doing with it. and no CNB will not give info on internal connections no that cnb does not have OSD

hi. not a good idea. you are reloading old software back onto new. if you have used 7.7.0.0125 you will see your display is not the same as the old NV5000 doing import and export is fine if with the same software or making identical units. but should not be used from old to new software. i would uninstall everything from your PC and run 7.7.0.0125

hi. which aver do you have. with doing a software change you will need to setup alarms again. also which ports have you used.

hi. have you bought this avtech secondhand as this is a old model ??? factory is admin and 0000 to get into full menu. but if secondhand this might of been changed in which case you will need to do a hard reset. the engineers way in is to startup your dvr and wait till loaded then hit the enter button 4 times. if this does not work then yes you need a hard reset. and avtech can be a little problem. its a 50/50 chance it will work.

Hi jim. its not settings its a dome match. with clear domes your cameras will be fine but you start getting limits if you use the wrong dome. how are you mounting the PTZ ??? on the dome ring (outer edge mounting of smoked glass) does it say poly or acry polycarbonate is not a good smoke dome and is very limited in use (internal lighting is best)

hi. how far is your router from your dvr.

hi. you will need the blackberry app loaded onto your phone. http://appworld.blackberry.com/webstore/content/39403/?lang=en

Hi. locations look good. but first what equipment are you going to be using ?? are you going IP analog or hybrid. what make of cameras are you thinking of ??? any camera looks good on paper but without knowing the cameras you will not know how good your coverage is going to be. what is your budget.