tomcctv

hi. first can you list how you have wired each camera ....... have you gone direct or have you used baluns. how far are your cameras and how many pairs have you used for video and power

hi. like i said a few posts back you have not opend your camera. (that is just the first stage) you need to get to the second stage. in your picture next to your blue switch bank. see the screw to the top right .......... you need to undo that and another 2 around the head. then turn your dome to the right and pull and you will see more dip sw. protocols and data send type. if its been on a siemens controller sw bank 2 switch 6 needs to be swithched off.

Hi the 32 has 4 spot outputs. you will see them on the BNC lead kit. BNC s are black audio are white and the leads you need are yellow

it is possable with that DVR but the controller you have listed is no good for that model. you also need a PC

hi power over coax has been in the industry for years . not used as much now but in the late 80 early 90s. but all you need to look at is what ever exists and for the future that comes as a balun for cat5 also exists for coax. new stuff all the time ........ coax ..... 2 cameras 2 audio 2 data 2 alarm 2 power over 1 RG59.

28 cameras with your budget cant be done. how big is your house ..... do you need 28 cameras ??? can you post a layout to be covered

Hi jimmy. another to look at is the aver. with 60 cameras to watch the aver has 2 monitor outputs (use 1 monitor shows 32 cameras ... 2 monitors it auto splits to 16 a monitor) with full mouse control. two 32 will give you 64 cameras and if you need to expand you just add a 4-6-8 or another 32 and the systems will talk to each other. http://uk.surveillance.aver.com/product/hybrid-DVR-SA6832E-RACK what sort of place are you protecting ???.

Hi .. cables i would look at cat5 for the number of cameras you are talking about. dont get IP and wireless cameras mixed up .... your talking two types of systems. what is your budget. ????

its not so much as the android version. its the fact the playbook WAS to work with all android apps. and BB looks as if they have changed there mind. another one of those sales pitches to SELL a product. started selling here for £280 now you can pick 1 up for £90. i dont think you will find a app developer spending time on the playbook. IPAD 3 is out in a few days

yes you will get all your cameras mobotix Q24 D24 M12D M24 just pick from drop down box on NVR to configure

much better than the Nuuo. if you mean to get your ip stream to the aver. then all you do is add ip cam address android iphone BB all free what make are your existing IP cameras.

So have you used that Aver box? Is the software clean and fairly intuitive? How much will it cost? yes we have many of the 32 ways out. the good thing about it is you can change your existing analog to IP when the fail in the future. and replace with 1.3-2 or even 5mp with no licence costs

i think all you need is a hybrid. just in encoders alone is going to take you over the cost or a 32 way hybrid. then you still have the cost of software (that you can find for the geo) and remember if your existing ip are not geo then you will also have a licence cost. http://uk.surveillance.aver.com/product/hybrid-DVR-SA6832E-RACK

hi. the NV6480EXP is a hybrid card just that that card is no longer made. and you can get a hybrid standalone for the same price. you could just about get the avermedia 1.3mp for that price. do you have any existing cables running between buildings ???? if you can find away of getting cat5 to each you will find its going to be alot cheaper than going wireless. what is your budget.

Hi. for 24 cameras that is going to be a lot of money. have you thought about going hybrid . to run all your cameras

to make it easy for you..... you have it right in your picture BUT you dont need the white wire in your picture where you have yellow going to coax centure and your 2 black cables together. you will find it easier to make you connection with 1 of these. yellow would go into the + and your 2 back cable will go into -. then you will just run power to the black and red tails left. then to connect your camera to your cable you will just need to convert the end with 1 of these.

i would start by looking at a DVR/NVR first. a few now come with POS built in and the advantages of that is each item is trackable where as if you just go for a basic overlay 1. they cost and you have no store of products. your register has no problems with what you want to do either via rs485 or direct over utp ..... (its the same as the torex system)

hi. can you list your DVR and what type of register you have (make)

Hi. that card is no longer made . you can buy a hybrid unit for that price. please dont its just a VGA camera with digital zoom (which is useless) and you will also find it is not supported by most hybrids (its not with the aver) the forum has just helped you save $1000. with pointing out both of your products are not compatable. it looks like you are looking for budget ip (network cameras) because of the distance ??? as you have only picked VGA cameras (for your ip) this can also waste your money .. as in building a network extra switchers. it would be worth the money if you was going IP MP (1.3mp or above) can you post a google image of the area you need to cover ..... it will make it easier for people to help. are you in a location where you cant get a cable to each camera ??

it was 8k for a analog system.

sounds like your dvr has lost its auto detect. power your DVR off then hold down the right arrow button switch DVR back on while still holding button and you should see your monitor start THIS is for a VGA monitor if you are using comp out to a tv do the same but with the left arrow button.

this still would not help you at all (have a think ) if you have to use NVRs that work this way. then its much better for you and your customer if you had a spare camera and licence in stock you camera distributor should help you with at least 1 free temp licence just for these problems.

hi. to be honest its best just to replace the camera. you now have a colour system and a old black and white camera. you can even just buy a budget camera and power suppliy

hi. dahua only do 4 way IP on all there hybrids. how many ip are you looking at using ?

on the q-see you could use mask setup on the camera .... mask off around the frame of the camera so as motion only detects in the centure of screen.