tomcctv

just create a new network account (from dvr.) if i type it again i may get Parrot Syndrome.

Are you saying that Optex can not be defeat it ? I am talking about PIR only a redwall (optex) cant be defeated by just putting a cotten sheet over yourself which is what is being surgested.

that will just be a factory reset. if you have the passwords then why do you want to do a master reset ???

yes on the avtech it will affect it. you are best connecting your dvr upto a DVD recorder of a usb recorder to get your footage off first. then do what was in the PM.

yes its always best to pay more than $4 for a sensor...... lets see them do it with a optex were did all that come from ............. so law enforcement have entered the ops home and moved the spong from the kitchen

hi. qvis needs 24v and 2 amp at camera. are you running power to cameras from dvr location or camera end.

like i said posts back its a 4x4 box. i think a case as big as this the footage would have gone through its water mark and electronic signature tests. your hungup on a SD system...... as you have seen there are two DVRs used hence the reason the box is still there. everyone can guess till the cows come home about the guys case ..... and i think it belongs here than on a cctv forum http://www.godlikeproductions.com/forum1/message1093416/pg1

good ip camera with audio out to a monitoring station. when your not there 24/7 monitoring

made in china and was sold under the TVS brand. old cif dvr. viewtopic.php?f=56&t=29283&p=181944#p181944

thats the problem they have mist the point in the design of the plate. coax to plate ----- plate to coax ----- then to dvr. lots of cable management that will hide coax. if it was cat5 to balun BNC and power above then it has a market

OH you dont rory at least you can just get on with your work. we have to put 1 day aside each week just for paperwork. risk assesments who reads them anyway

excableguy................ good find. but if they had made it with 4 baluns at rear it would be a good neat job

we all know the limits of are ladders and such. its not how we use them or where we use them its the insurance companies who bring all this crap in and its that we have to work too

same in the uk. we have been doing work for shell oil for 15 years and in the past 5 .. we are not even allowed to take ladders on site .. if we need steps we have to use some from there store sign them in and out

some places do allow ladders ..... but you cant just take them off the roof of your van and get to work. like i said insurances ... risk assesment all sorts of stupid crap ....... same as if you use a ladder you have to wear a hard hat..... whats that about.

to mount a $100 camera? it can be a $20 camera if the location your job is at does not allow ladders then they pay the cost.

i would give ebay a miss.......... you can buy much cheaper between 8p and 15p each .... and you can also buy just the center pin ..... if you drop 1 .... 1000 £2

yes it will affect your footage. the problem with your DVR is the 777M which relates to what part of the world your in. and finding firmware is a problem for your DVR if you use A or AB it may kill your DVR. i will PM you something to try first ........ but like all avtech sites YOU DO THIS AT YOUR OWN RISK. PM sent ...... lets know how you got on with it.

thats a thing of the past in the UK. most places dont allow ladder work and if they do you need paperwork as long as your arm. insurance for ladder insurance for employer day insurance to cover the location you are working at. certificate to use. its cheaper to hire a platform or to buy hydraulic hoist.

thats right ..... public CCTV will be displayed...... but covert for staff reasons would not be. if you look at each footage at least 3 of the public footage has white time stamp ..... the 2 covert have yellow time stamp..... your just looking at two systems.

why did you not put your reasons why when asked about your interest. i found 3 lots of video from the hotel of which there are two time stamps. so this could mean they have 2 DVRs and you will see a small time difference. may have covert for staff and another system for public. cctv has played a big part with this guy. 2 girls dead who were with him and a 3rd not yet confessed

you dont name the book/// you dont name the news clip. now you have footage. ???? and NOW you want to take it apart... its a bloody good book your reading. its covert its there and i think thats all the info you should get.

hi. john which type of power supply are you using. you can also get ghosting from a power unit ..... if it a all in one i.e 8- 16 way. then start by taking the nutral off from each camera and see if it goes

the units (dvrs) are Cif resolution best looking for D1 and not from ebay.

i would do a claim with paypal these DVRs are old cif units. did it come from china .... always best not to buy from ebay.