tomcctv

soundy has got it right. we use kinetic changers lots out there and cheap. ....... the only problem with hardwire when doing covert stuff is on cars over the last few years things like stop lights and lights is most cars have Resistance Measurements which tell you if you have a bulb out

hi yes they both have pre amps (power gives it away) both the same in your links except the bottom one is for 10. so thats a $1 a mic. i would pay a bit more than that. is this for a customer or for yourself ?

cellular. but with no costs.

hi John. with the ganz software disk you should have on it a prog called ip discovery tool. you can loads it from ganz uk site if its not on disk.

no. the module just sits at gate (works with 90% of openers) its GSM so you progamme each phone to be used and just push 5 on mobile to open gates. same from house programme a speed dial key on every phone in the house again can be 5 to open gates ..... two gates 1 being 5 the other being 6

would network not limit you to what mobile you can do with a mobile. are you looking to see video while opening gates

PM sent. if you still have problems after that. then you need to PM me the S/ number from the back of your DVR. to generate a new password.

which password are you using ??

Hi Brandon. have you thought about GSM we make are own. good thing about GSM is your customer can open the gates from anywhere. plus it gives more protection. if gates are forced open it sends a text and also if left open

yes and app for iphone. the ports are right.

hi. there GPS why do you need to remove it ??? it defeats the object if you need to find the stolen car or horse. to then find out were its been. we use snooper. Car truck tracker Pet tracker.

did you do software or firmware ??? also which password are you using.

your on a BT 2 wire router. why not just setup via services and not nat. your dvr is the avtech like i said posts back. iphone is eagleye. all ports are good but as you can see they are directed via external ip. delete all your settings. then go into services then click add. and make a new rule for each i.e cctv1 port directed to dvr and do that for each port. click apply all done

its not expensive. basic kits with google maps are $130. we even have a little GPS that you attach to a horses. if the horse is away from a home in a remote field. the owner can set the field area on google and if the horse is stolen or gets out of the field it sends alarm with google maps on the location. gps use to be expensive

like op has said and i have said LOCAL with a IP kvm on anything other than a pc he will not get mouse control. local he would not need a IP kvm. he would just need extender KVM which is copycat from 1 kvm to another. so no comprestion is needed. but the guy will not answer if he is away from each dvr .... remote ... or if he is doing all this local.

quick way is to load new software on the SEB. latest is 07/2011

soundy because we use ip KVN for central stations. slingbox. ..... image never leaves the slingbox ..... it does not send out you are connecting to it and watching its stream from onboad media server. why are we talking USB ??? i see for the mouse ...... that is not going to work either. ill tell you what happends if you TRY and do it that way. VGA to IPKVM then it has to compress and format now that makes the mouse usless (the raw video has been altered) so no control you only have to read the Startech manual (of the one listed) IT cant take VGA .... only vga and usb is used to config the unit ... ports on back only take data. if you call the guy back at startech and ask him will there KVM take raw video from vga. see what he says. the video and the mouse ... needs to be compress to gether in the same format to work. he has two formats video from vga mouse from usb ... you cant put them back together at remote end. even the other one listed .......... he has no way of connecting his vga.

No you cant do that. it will not work. also are you expecting to get HD from it if you could ??? you could just swap internals over. but then you would end up with a IP camera so then cant connect to dvr.

i understood your post from the start. i thought i did. then you post this can i ask do you know the difference between local and remote viewing ???? ARE YOU AND ALL 8 DVRs IN THE SAME BUILDING ??

like i said many posts back there is a KVM server. but the cost is 12k (for and for you to spend that type of money makes no sence at all. sit back make a cup of coffee and think about it ......... you can change all your $100 DVRs for ones that have a good CMS (full control) for half the cost. But the big question and its been asked before. WHY do you want to watch the channel Tour. your systems dont record cannel tours why is this a problem for you. why do you want to set up your systems like this What is the reason for it ???

ok another way. and it still will NOT work. your local........ DVR to your PC next to it. connection will be lan ....... so you call your dvr screen to your pc. then you go IP KVM sorry but is that not the same as remote viewing. (dvr -WAN -remote PC) you are looking for the OSD that is only from your VGA. if your DVRs have managment remote you would have no problem .... but your dvr only has remote viewer and CMS. i have just thought about what you are trying to do. is it. all 8 of your dvrs back to 1 location ..... (1 screen) and you want to set a camera tour ???

soundy from posts way back it is vga to KVM ....... the one you have listed has no connection for VGA .... Really? Then why does the back look like this? Looks to me like a standard connector for a VGA/PS2/USB KVM cable... yes they do. but you only need to click on the install manual on the same page and it tells you they are not for VGA ..... it is data only connection to PC computor port connectors nothing to do with VGA .. ok will try and put it another way. KVM listed ..... you are only sending data from connected PCs to remote pc. anything over the net is data this guy wants to send raw video from his standalone DVR ...... (direct from his VGA output) so he has connection problems 1. he cant talk back via his VGA (its output only) so he cant even get a ip address to even set the KVM up ..... then and this is what he wants ..... he still has no mouse control. as mouse is not sent out via vga. if the guy had PC based systems like i did say back in second post he could do what he needs. but standalone $100 dvr. no. but the other way to look at his problem. KVM listed is $880 ....... the guy can change every dvr he has for ones that will give him full control via mouse .... that will save him paying $880 just to move a mouse. but still for what he wants. slingbox is made for. and it works

we know that as the D Series. and is only BNC no vga. from 4 years ago

Hi. wireless will slow control and video. if you can get a cat5 to your PTZ then yes i would go powerline. just new on the market is the fast Neatgear nano 500 set XAVB5101 powerline.

its been posted on the forum more times than seans popcorn. i ment we all know why. but people buying cheap crap from the likes of ebay dont understand that as well as video other factors need to be thought about