tomcctv

Hi you have some bits missing from your pic. you should also have a plastic slide plate that your camera attaches too and you should also have a plastic plate which seperates your housing (sits upright at rear of housing just before cut outs) also in the kit you should also have two plastic rings (pushin type) that you use to seal the vent style holes. if you ordered the housing with weather or audio kit then you will see a MIC kit that fits into the hole closest to the lens window. weather kit you will have a thermostate that will fit into top right hole (looking at your photo) and you would also have a replacment housing seperator with a small fan inserted. and last hole (bottom right) is for cable which is why you only have 1 gland pack. you can just silicone the holes if you dont have the push fit coller or audio/weather kit.

Maplins junk fixed lens and no cut filter. take it back and get your money back (buy another and it wont see the year out) PM sent to you from a good distributor.

they are right. it all depends on which hybrid dvr you look at the SA will run 9x 5mp or 16mp the dvr cant go above 45mp in total

Hi just a NVR/DVR will do the job. if you are using both analog and IP then your frame rate will go up as on ip frame rate is set at the camera http://www.averusa.com/surveillance/products/hybrid-dvrs/eh5108h.asp

hi. you need to entre user name and password. user >> admin . password > 111111

Hi enter the following.. admin/111111 It already has the user showing as admin and ***** showing has password. But I have no idea how to bring up the keypad as I only have a remote to enter any characters. Thanks Nick http://www.mcmelectronics.com/content/ProductData/Manuals/82-12895.pdf

Hi enter the following.. admin/111111

geo should pack everything in and start selling kids story books ....... Once upon a time we used to look after our customers talk to your credit card company Get your money back. i can understand repair if out of warranty you have only had them for a month.

effio are not what they are made out to be dont fall for the crap built in new york even the company you talk about has dropped to price by $40 in a month (must be for a reason) you have qvis Effio you have the winner5 and you have CNB which still just take the market

Cant wait to see your christmas footage. soundy posted some a few years ago. so you have something to work with.

100s call them selfs authorized but are not. your problem has been going on for a while the longer you take the harder it will be. your not talking a few $ your outlay is $1000. dont make the mistake of thinking geo has your money. its the dealer you need to be going after. talk with your credit card company

or save money and just buy the hybrid dvr

1 cost hybrid no licence rubbish will cost less than you can build using geo. also free is the POS cash log from register. http://www.averusa.com/surveillance/products/hybrid-dvrs/eh5216h.asp

sounds right spec 111 se with heater only on 4 amp. sign of not enough power. camera will be fine till you try to move it which needs more power you camera does not have. disconnect your heater as a test.

i never spotted that Sean. thats like a china ebay. if your not in china then it can get more expensive shipping costs and if detected you could also be looking at paying duty on it

Hi birdman for a guy with your knowledge it is easy. but you know what some distributors are like (open the unit voids warranty) even tho they sell with or without and also if you want to add more. when you do order just ask them to send you in writing fitting yourself does not effect your warranty

i can see two of my customers in that picture Deans gate manchester ??

Hi yesit will work with your aver. you may have to download the up to date ip patch (depends how old your dvr is) if you go into ip camera settings and you should see vivotek FD7160 (which is the same camera) if you dont see it i will send you the patch.

its not typical of geo to take so long if it is done though the proper chain. but the warranty is not with you and geo its between your distributor and geo. did you buy your cameras from the likes of ebay ???? why did you not go back to the seller ??? is your seller an autherised distributor ??? geo will not repair anything that has been sold out of there distribution network. (it tells you that in every manual with goods) $1000 is a lot to loose so i would focus on the company that sold you the cameras and not geo. if you have a RMA then send a email and fax and a phone call to geo. requesting the return of your cameras with a faul report and that you will be sending a courier service on monday noon to collect your cameras.

Hi. if you never bought the camera from them then there is no point contacting for a RMA (you will need a dealer code to get that far)

I'm still waiting for twist-on RJ45 plugs..... **********Edit********* Yeah, I know, technically, they should be referred to as "twist-on 8P8C modular connectors", but everyone calls them RJ45's! wish there was something as simple as twist on but what has become a simple design change to standard rj45 is the srip after crimp. never waste a rj45 again with the likes of legs to short

hi. i would also let your customer know that the dvr he has is way out of date ... he cant play footage back on pc he cant pass footage onto police (needs dedicated software) at the moment the dvr will only have 160g HD which is usless for a storage 4/5 days

do you think so rory ....... your not the only person that deals with dahua but my point was to the op HE will not find a device list on the manual ivan has sent to you (the dvr DOES NOT TAKE IP cameras direct) so its not a hybrid and it only calls VGA or 1mp cameras. so if the op is thinking of adding say sanyo/samsung/axis/ mobotix. then he cant

i think Irvan is pulling your leg. Dahua have a much better hybrid than than manual (infact that DVR in the manual you cant call hybrid) its max 1 mp

just the right crap from ebay STATES 3MP its only VGA (a webcam)