tomcctv

Hi sounds like an old dvr that also needed a VCR to do the backup. you can either replace your unit or buy one of these just plug direct into VCR out on your DVR and plug via usb into windows or mac pc to do the backup. http://www.avermedia.eu/avertv/UK/Product/ProductDetail.aspx?Id=473&device=4

hi. at least you had redcare installed (5 mins was not bad reponse) please stay away from swann systems you are just wasting money. not many systems playback on android mobile but one that does is the aver nano and its hybrid. with you having redcare you can also have internal cameras trigger off and redcare will send you a message fia sms

then another 10 hrs for the discharged battery to charge up. but its all pointless if you have no camera power.

i think you might be doing more work than you need to do. just test the existing cat5 with a network tester. just because someone else put it in does not mean its bad. then power cameras local and use 4 way balun for images 1 at camera end other dvr end.

hi. if you are handy with a soldering iron then it will cost you nothing. on the 6 pin com plug pin 4 is + and pin 5 is - for your dvr rs485 connection.

Hi 1304 has not been made for 3-4 years so it will be old stock and old software so iphone app will not control. the aver Nano 4 is a very good hybrid if you want to upgrade your cameras later. full iphone comp with playback and record from ipad / iphone

how would you know this ???

Hi. should not be a problem. but its like everything. Maintenance keeps your system good. if its not used i would take it down (take camera out of housing) and make it part of your startup service maintenance. spending a little time is much cheaper than buying a replacement camera.

oh i see what you mean now. open new youth clubs then remove the cameras. your from manchester ??? did you see in your local paper 45 year old woman raped walking home all caught on cctv a local 58 year old scum guy . what has that got to do with getting kids off the streets.

is that not what they are doing. a service for the community.

that will just give you problems. what about end of line termination ??? just buy a roll of cat5 link camera A1 to A2 and A3 and drop the link from A3 to B1 and the data link to each dvr. job done. if getting cables to the camera is a problem then just ADD a controller if both DVRs are next to each other that may be your best way

like Campbell says not much you can do. you would have to post footage to see how bad it is. you could get other bits of info from your footage like window stickers and other info from the cab that may help you to identify the taxi then go back to were it picked you up. and you might see the cab (it will be the one with the well dressed bangkok man )

sorry but what is the point of refering to them if you dont know of them or know them for your project.

that depends on what cameras were being installed (do you know the spec of them)

hi. the Leviathan. is a very good little unit what size do you have 4-8-12-16 ??? the system can be played via windows but depends on which software you have. in the top right corner does it say delta wave or ljd 2 or ljd 3 (under the moving world)

Hi. buy a seperate kit. if the monitor has a problem on the system you have posted then you have no recorder either.

they must make the American ones different then. they do rory. you cant buy the monalisa in the uk.

hi. never had a CNB as bad as that. BUT i would say it is a setup problem. you cant compare those two images as the lighting is not the same in both images. CNB you have the extra lighting infront of the camera and on the Mintron you have it behind the camera

with your budget give ebay a miss. (no warranty) and your friend will only have to buy twice. Aver nano 4 is in your budget along with some small 650 tvl sony effio-E cameras.

Hi bantham are you going to sell me your 9000 pro yet

and end up with a system that only does 6fps ... how does that blow away 30fps ? that would be six images which works out as 3fps (frame not field) or ips

to be honest your buying crap. this is the spec from one of the cameras you have listed . Dimensions: 65mm(H) Diameter: 92mm(bottom) 55mm(top) Power: 12V DC Color: Black Pickup device: 1/3'' Sony Super HAD Color CCD Image Sensor: Powerful 1/3'' Sony CCD color image sensor chip Picture Elements: PAL: 512(H) x582(V) NTSC:512(H) x492(V) System of Signal: PAL Electronic Shutter Control: ON/OFF Switch Electronic Shutter: (1/60)-1/100,000 (sec) White Balance: Auto tracking white balance S/N: More than 48 db Auto Iris Lens: VIDEO/DC Backlight Compensation: ON/OFF Switch Horizontal Resolution: 420 TV Lines Lens Mount: 3.6mm Lens Mount: C/CS Mount (C Mount adaptor option) Minimum Illumination: F1.2/1.0 Lux Video Output: BMC 1.0 vp- p 75Ohm SCANNING FREQUENCY: PAL: Horizontal: 15.7343KHZ Vertical: 50HZ NTSC: Horizontal: 15.625KHZ Vertical: 60HZ Operation Temperature: (-20)C-(50)C what is that all about THE CAMERA HAS NO WAY OF CHANGING THE SETTINGS.

Hi same unit as the old deltawave / dahua. there has been no support for I.E for a long time. you need software to view your system. if you have a VCR connected then recording is fine. you could look at a encoder fitted to the TV/ monitor out to just view your cameras over the internet.

your card is 2004 / 5 tech were talking to you about 2009 / 10 card hence the reason for your D1 problem. that because its not on the card SHE was giving you advice about. it sounds like you want your 2004 card to function like the 2010 card (that cant happen)

POOR Connie. what2be. when you talk to geo you need to give them as much info on your product as possable your talking about 1 card and Connie is talking about another. i dont think she went on her lunch break i think she got a headache.