tomcctv

sub station poles should never be an option in the first place. (owned by power company)

metricu_cctv_tester you have made your point. please NO MORE PMs.

this service is down till wednesday it was taken off line to move. you also need to use port 5550 and 1053 for avers ddns. and you will need to use port 5550 at the end to log in. http:// yourip:5550

you have gone in to remoteviewer and used admin passwords.

we use Kramer products and never had a problem. you can get almost anything from them HDMI/vga

Hi jez. yes only 3 cameras CH1 anolog CH2 1.3mp CH3 ip. CH4 no camera and 5/6/7/8 not open to view.

not only a few minutes it would have to be the full hour. how did you take the footage off. sometimes by segment you can loose seconds and minutes. if you use low speed memory pens. but you can also have mist a few minutes if you are recording motion and its not set right. NV you should use smart record

hi jay. can you try this on your Crestron, this is another EH Linux hybrid (not nano) and see how many cameras you see. http://remote.aver.com/mobile/channel3.html

two zeusmk2lites. Zeus MK2 Lite. ..... has PTZ and only does D1 on all 4 @7fps (cant alter) Zeus MK2 Lite D1...... has no ptz or rs232 and can do D1 @30 fps on channel 1 only 7fps on rest or cif. both on old software. then you have the Zeus 4/8/18 to be honest the lites need to be scrapped. to go for the apollo there is not much in price

not a problem. also new firmware is available for you dvr. faster remote viewing/ full IP camera patch/ and the new I-Frame view. update. http://www.averusa.com/surveillance/download/EHseries/EH5216H-H.264/X8.02.24.02.03f.zip how to update firmware. http://www.averusa.com/surveillance/download/EHseries/EH5216H-H.264/HowToUpdateEH5000Series.pdf

hi yes you can still attach to a TV or pc monitor. and the rs232 has been removed. but you still have rs485 for PTZ control. the zues lite is just a basic unit still 25fps @cif or 6 fps @D1

hi, do you know anything about building a small network ?? axis are good cameras .... what software or NVR will you be using. what is your clients budget ???

hi on the aver EH5108H you dont use any converters. you have your PTZ pluged into the POS data. you plug your ptz camera into tx+ tx- on the back of your dvr.

Another test monitor to take alook at is the ip and analog all in one. full touch screen / PTZ control / UTP tester works with all analog cameras and ACTi, Arecont Vision, Axis, D-Link, DVTel, GE,IQinVision, Level One, Optelecom-NKF, ONVIF,Panasonic, Planet, Sanyo, Sony, Vivotek from camera (powers camera )or switch.

Aver is the new name of avermedia security tech.

Too small to focus with. These are all just service monitors for basic adjustments. Hi. these are made for focus. they dont have a tv or vga screen so it give a crisp clean image via projector they have been making these for 20 years but they are around $600

not many monitors have been around as long as the computar PSM012. it is a true focus monitor. it is a little more than your budget but it will last you years mine is 15 years old. you can find the odd one on crap bay and cheap (only because the seller does not know what he is selling)

hi. you will need to set your baud rate to 2400 and your ID will be 01. are you going direct to your dvr RX TX

there own warranty tells you its crap... everything else on there site has 1 year the 1 inch monitors only has 90 days

hi. are you going to use both ip and analog cameras with your system ?

if you contact BT they will give you a static ip it cost around £5. then you will not need a ddns set up. you cant use IE from your own network. you need to get someone to log into your system for you what ports have you used.

just looked at the peak spec. and its only 5 volt and not POE. so your cat5 is ok to use. at the NVR end use a POE injector and use the sanyo as POE. (test cat5 with tester)

who is your ISP. before you try a ddns service get you system working with your external ip first. once you know it all works then set your ddns up .

befor you go spending money the first thing would have been to test the old camera and power supply. what make was the old camera ? and will the software take a sanyo.

so long as the power coming from your power lead is 12 or 24v then it will plug into your sanyo. if you want to go POE for just a few inches then yes just use an injector but it is a waste of money.