tomcctv

Hi Adam. i think you might be going the wrong way with this. the vga on most pos systems is to duplicate the original screen. yes this can be converted to bnc then put though an ip convertor but this is not pos overlay. you might be better looking at milestons pos overlay which is an add on.

well done. but your pc spec you have will not run either of them cards. oh and by the way you dont have to say thank you for all the info i sent you. but anyway good luck with your cards You still dident send me any usefull info - so why thank you? I have other systems I can run it on, no problems there. on all my time on here you have been the most ungrateful BOY. you know nothing of fps so i send you live demos/ with so much cctv info and you say its not usefull. YOU LITTLE BOY. IS GOING TO SPEND a lot of time on this forum looking for help with your clone gv cards. $75 each and you think they are real. i give up and i hope everyone else does

well done. but your pc spec you have will not run either of them cards. oh and by the way you dont have to say thank you for all the info i sent you. but anyway good luck with your cards

Thank you very much! I have found the card to $179 What software do you use with it? I also found some cheap 16 channels GeoVision (used) I will look into them also. HI Did you get the demos that i sent for you. ???

the reason why i brought it up is to let you know (as it is a old card) and i am not the one who has been trying to run a window card on linux. also audio you need drivers

Hi serverguy. on the D12 you cant have both cameras pointing at the same target. you will need the m12

Hi athlon. this is a windows card. and then it is limited. to At least, Win98 Second Edition, Windows Me, Win2000 or WinXP. Does NOT work under Win95 or Win98 first edition.

First of all, you shoot down all everything I write. Just because you don't like the idea of my needs, dosen't say that it can be done! I don't need more that 48 hour, period! If there is missing cash, we can see it on our register, and see excact what clerk did it. We can see that for every day - and at the end of the day, I can check the video to see where the money went. I can not use footage older than 48 to anything else than filling up my HD. If there is an alarm in the night, well I will not wait over 48 hours to see that! Listen to MY needs instead of YOUR needs! see i was nice to you. these are not my needs this is what you need. so you say you can see were the money has gone from the till without that frame rate by looking at your till roll. bull. you dont need more than 48 hours. ok many stores that get robbed starts a few days before they will come into your store look at security look for other exits out see how many work there see if you have security staff. then they go away and plan what they are going to do. this is the only time you might get the chance to get a face to catch them so yes you need more than 48hrs. also cctv is very good for stock control put 4 bottles of budlight out your till shows 1 sold but the self is empty who took it and how long ago if it was more than 48hrs ago you wont get that. but you know best thats why you came on here i dont think it matters who gives you advise you will still fit that crap.

nothing wrong with my attitude. its just you are hearing things that you dont want to hear. so we will start again. what i am trying to say is if you are going to build a system or buy i system the first thing you need to do is make shure it is fit for its purpose. no one will be happy with a slow bad res system so the first thing you look for is fps and recording quality. you have said it is for a store. so you are going to need either 10 to 15 fps or higher on each camera or a system were you can set each camera for what you need. lets take you cash area this sould not be less than 15fps. you want to see everything that is happening with the money. if you go below then all you are going to get is staggered images or even miss the money changing hands. entrance you also need 12 to 15 fps so as you can try and catch the faces. (i have sent you fps demos side by side and you can change the fps on each camera) then you have a recording setting. cheap systems are cif only you need 4cif or D1 over your cash points this is to make out what is going into the cashdraw. and also storage (H/D space) for a store 48hrs is no good. you need at least a week. but more would be better.

yes something like this. 1amp on each output. were are you based ???

power pig tails

Your system should not save more than 48 hours so lets put cctv system in and never go on holiday ,,,,,,,,,,, honey lets book a holiday sorry sweet but are new cctv only records for 48hrs lets go the mall instead.

you can get RG59 with power attached siamese. it makes the install easyer.

your fps has nothing to do with you up grading your internet. this is the speed at what your dvr records. on each camera. plus you are going to need more than 250gb H/D for your 12/16 camera system. i think you might be better looking at buying a system pc based or standalone. i have just been looking at the spec on your cards. as a 4 way you are fine but add more cards to the software (12 cameras) you are only going to get 4fps 16 cameras 2-3 fps. this is usless.

Hi yes that correct. the RG59 you can get with power as well i would look at that for your install. all you need at each end is a bnc connector

so you dont need cards yours are working fine . so now fps you need good fps on cctv. you need between 8 and 15 to have a good system. then you need to find what format you want. but before you do this the system your are building how much storage are you going to use.

i would say use RG59 with power. but you need to make the leads. it might be better letting people know were you are. and see if anyone can make and send them to you. plus you also need a power supply for the cameras.

you will not just have clone software but the cards will be as well (think about it) no point building a 12/16 dvr with a budget $200. there is no point why anyone would want to build a crap cctv system. The Software is piracy yes, but the card are not. The total budget is not $200 - that was for new cards with software. But thanks for your fulfilling answer! you buy cards and software from ebay and you say the cards are not cloned. well if you think you have real cards. then you spend good money with pico for software. then you will have to buy a real card oooops more money. the total $200 for a 12/16 cards all you are going to get is crap it wont buy you anything nothing/nadda/ i give up

you will not just have clone software but the cards will be as well (think about it) no point building a 12/16 dvr with a budget $200. there is no point why anyone would want to build a crap cctv system.

http://www.mobotix.com/eng_GB/Products/Home-Automation/Video-IP-Door-Station2

the specs and appearance ........... clone cards look the same. and i think when he buys this card he will be stuck with the software it comes with.

its from ebay. and you are already talking about changing the internal camera. you have only $500 of your budget left WHY SPEND IT ON CRAP. you should have looked at this before you ordered one. viewtopic.php?f=22&t=20643

updating your isp will not make the old eb faster over the internet. it is the dvr. the new eb1304 sata is quicker.

you could always put a sign up there is not much you can do if the camera has ir built in. you will be better installing another ir away from the camera.

dvrwee. i hope the owners of the forum switch you off. just done a check on your phone number (you forget your on a security forum) $50 a min. cctv experts YOUR JUST A CONMAN. I HOPE THIS GETS YOU REMOVED.