tomcctv

Basic So, one course for 600$ and you become Mobotix certified partner? What advantages do you get after becoming certified? contact number for mobotix london. +44 (0)20 7220 4455

yes you are right mike. coaxitron is control and video over coax. found on older ptz cameras.

its not on the number plate. but zooming in from the camera it has no problem day or night. robert have you used ip cameras. dont forget the res on ip 1000 times better than analog . were are you based ??? London/Latvia london uk ????

its not on the number plate. but zooming in from the camera it has no problem day or night. robert have you used ip cameras. dont forget the res on ip 1000 times better than analog . were are you based ???

30 fps unit will cost lots 15fps will do you. but are you also going to be looking for this frame rate over the internet. just pm you 1 camera at 15fps and 1 at 30fps

Oh, my bad English skills I will try to explain once more what I meant. Lets say you calculated that you need 3mpix camera to see number plates of cars entering gates. When it switches to 1.3mpix at nigth, you wont have enough resolution to see number plates. Whats the point of that 1.3mpix if its no good? There should be two sensors, both 3mpix. 1.3 is better than 3mp at night. and recording at 1.3 still has a very good res than any analog camera. meaning you can zoom in from footage. have a look at this live camera 3mp day 1.3 at night. this is a mobotix M12 http://www.mobotix.ro/ro/index.php?id=10055&lang=en&camid=1521

q

remote consol or cms will do what you are looking for. cms will be better as you will also get the alarms up on screen. i.e. doorbell/gates/movement.

your dvr is over 12months old ....... please change the date on your pc clock to may 2009 then set it back when you have finnished your downloads. there is a firmware update for this problem but its easyer to change the date. i will pm you the update should you need it.

try this to down load remoteviewer. log on to your dvr as you do when you are away. then when you are loged on on the right hand side you will see icons click on the secound one down this will install remoteviwer. close all your window and you will see a new icon on your desktop. at the bottom click setup enter your local ip and below that enter your port. click ok then click network and enter your password

yes set your port forwarding for your dvr to 5550 and also portforward 53 and 1053 for ddns to work and then click on this link to set your ddns name. http://ddns.avers.com.tw/

your dvr will auto load remoteviewer onto your pc.

remote console lets you look back at footage. entering your ip and port only gives you webviewer. cms is ok if you have the alarms setup but better with remote console as it gives you the same screen as the sa or nv dvrs or IMatrix is even better.

your dvr is set on port 80. no mobile 3g or satellite will let you log on though 80. move your port higher i.e 5555 and you will also have to add your port (http://yourip:5555)

to log on to avers ddns server you have to also add ports to your router for there service. Here are the list of port numbers required on the Port Forwarding configuration: 1) 53 and 1053 for DDNS 2) 5550-5551 for Remote Console 3) 5555 for Remote Desktop on the Central Monitoring System Software your 1304 has port 80 please change this to 5550 (do not use 80) then on a pc on the same network enter www.ddns.avers.com.tw then enter your details. and your done. http://yourdetails.avers.com.tw:5550

1. NV/NX/SA/XR/NXU with 7.1.0.0043 version and above [New IP Camera Support] 1. Camtron CTNS-101 2. ACTi ACM1231 3. ACTi ACM5601 4. ACTi ACM8211 5. YOKO IP1130W 1. Total resolution of all connected IP camera cannot exceed 42MP in NV/SA 7.5 version and above 2. H.264 IP camera can only work with NV7.7 version or above 3. Please check detail support list for possible special limitation of different camera models

what ip cameras are you using.

hi ben then soundy is right with the addaptor. sorry thought you was controlling your aver with a mouse. but the way you are doing it you could also use the remote control for the nv composite output.

Samsung Sony Sharp ect ect Im just looking around to make suar we are well priced all the site's i can find throw googel ect we can beat 80% on price & match the other 20% so im just looking to see if there are any i have missed. Chris http://www.Securityfusion.co.uk you work from home. so i dont think you can get close to trade price. not on brand names anyway.

What make do you sell ???

Hi larry. i have just PM you with the remote ap the avers up to date

hi mark. i have just PM you some sp files and also some updates. just click on avermedia downloads and pic your card. it does not mater if its an nv or sa all updates are the same.

how is the monitor connected to your dvr ie coax or vga. and do you control your dvr with a mouse ? then if not the connectors listed will be fine. used off the mointor output on your dvr.

if you are using pc based dvrs then the adapter is no good. this will only work of av tv inputs. best off using flat screen tv monitors with all connection types plus vga. for all installs.

bpzle. i dont know what the guys from sanyo america are like. but here in the uk they sent the cameras out without payment first. and there tech guy. but if you have not tried sanyo they knock spots off exacq.