tomcctv

Hi lous. a pic of the camera and a pic of the cables would be good.

Hi lous. is it pos you could post pictures. as checkpoint dont make cameras. just stick there name on.

Hi racealoot. what port have you used for the dvr. and do you have a static ip.

out of the ones you have posted. the avermedia 1304 net sata.

Hi touring. just pm you some update links.

the avermedia you have listed is about 2 years old. there is a new one EB1304 net SATA alot better dvr and it has alot more features than the digimerge. the aver is a much bigger spec.

any ip camera you look at will be better than proline. before you start looking at ip ask yourself this. how are you going to record from them/ what do you need them for.

footage of the mobotox with your ir on at night. so a footage of mobotix without your ir and footage of the mobotix with your ir. to see what it is like.

do you have any pictures before and after with your ir sensors

that link is for nvr software and not for dvr cards.

so you are on a 1 port modem ??? with router attached. you still do the same as soundy has stated. also are your dvrs the same make. and what make are they. it might be better for you if your dvrs have cms software.

Hi welshman. with using sky i think you have a netgear router ??? if you portforward 8080 to the local ip of the dvr. then to use away from your home you need the external ip. google myip. and you will see your external ip in red. sky (bt) will charge you for a static ip £5 ayear.

you might be better saying what your budget is.

Hi DK. undo your center core and mesh and test again. this will also show if you have a short.

Hi soamz. your post started off good till i got to the part wireless. these systems are no good at all. install a system that is going to work. you say you are building your villa. install cables for your cctv system. were are you building your villa ???

that cable is fine for outdoors. how are you going to power your camera. you might find it better to use this (pic) and if your run is not to long.

Hi. you can use the same settings as the HD4000p. i will set-up a system on wednesday so as you can login and have a play.

Hi wendy. this is because you have portforwarded port 80 on your router.

plusnet blocks port 80 can you change this on your dvr to 5555. so portforward 37777 and 37778 and 5555 in your router and you also need to be on another network to check your remote viewing. and you also need to enter your ip as follows. http://localip:5555 http://externalip:5555 Sorry just to check, should I change the HTTP port from 80 to 5555? Thanks yes change port 80 to 5555 as plusnet blocks 80. hope this helps.

It has the same Xacti engine as VCC-HD2100/2300/2500. I did a job for customer last week with few 2300 models. Day time - very very good(with Fujinon megapixel lens), at low light - crap. Also, at 4mpix it gives just few fps. I set them to 2.1 to get 8fps. Overall its a good deal for that money. Hi. bpzle. i have used 6 of the hd 3300 and 2 of the hd 3500. and it is nothing like the hd 2100 cameras. the night (d/n) is the best you will see. what helps D/N is the auto focus. and also on the avermedias you have full control (with 7.7 software) H.264. Robert. you have a settings problem if you are only getting 8fps on 2.1

you can from smartphones or pda but not from your iphone and jailbrake will not help either. you could just buy a cheap nokia pay as you go

I figured out how to do the port forwarding from portforward.com but I forwarded the ports 37777 and 80, not 37778. Would that be the cause of it not working? ISP is Plusnet, and I'm in Leicester. Thanks. plusnet blocks port 80 can you change this on your dvr to 5555. so portforward 37777 and 37778 and 5555 in your router and you also need to be on another network to check your remote viewing. and you also need to enter your ip as follows. http://localip:5555 http://externalip:5550

i would just try installing 1 card for now. as i can see you having problems.

sorry i cant find any info to help you port forwarding ports on the thompson router. but you need to portforward 2 ports to the local ip of the dvr. the ports are 37777 and 37778. who is your service provider ??? and were are you.