-
Content Count
11,780 -
Joined
-
Last visited
-
Days Won
131
Posts posted by tomcctv
-
-
Hi why bodge a job …… install another cat5 or just use a two way Poe switch ….. they don’t cost alot
-
1 hour ago, MarkAlbrighton said:professional developers crap? By the way, you don't have much time left.
If you don’t have a clue what your selling no wonder you have to spam
you don’t have much time left ????????
why is your spam going to self destruct???
nothig but lies for your company
-
Hi that is a China app controlled camera you will need to download the app first AppStore or play store look for YCC365 Plus
if it has been registered before you will need to reset camera first …… little pin hole next to sd card slot on top of camera
the app will take you though setup
-
Hi ok that is the no fuse type (auto reset)
I have had problems with them in the past and they do start getting weak over time
if you don’t have a lot of power cuts then I surgest removing the red and black wires power connection in the power supply for two cameras ….. switch all back on and then reconnect the two wire in power supply while still on
the power supply is just on its limit and when starting 16 cameras at the same time it struggles removing two cameras first gets past this problem
were are you located
-
Hi this sounds like you have a power supplier problem for the cameras
do you know what size your power supply is
-
5 hours ago, ideas said:i know they are completely different which is what i want, so i may be able to install other cameras with facial, human, vehicle detection, line crossing, motion area, camera deterent
Hi not on that recorder you can’t …. It does not have the software onboard to enable it or read the camera data
DDNS is simple don’t use lorex do a simple port forward
but your making no sense or your trying to do something on the cheap (very cheap)
if your buying cameras with face vehicle and line …… (recorder does motion )
just spend a little more on nvr instead of trying to bring a 7 year old unit upto date which you can’t do
-
8 hours ago, ideas said:just found some more info
processor=ST7108
updateSerial=NVR5X-4K
Ok that’s good
-
56 minutes ago, Jim G said:Is there away to connect a remote control to a Swann Pro series 960H H 264 DVR. I am looking to be able to rewind, fast forward with a remote control vs a mouse.
That depends ….. did your recorder first come with a remote …. Some did
for a remote to work a receiver needs to be on from of recorder (you will see on the front
there is another way Microsoft usb remote which I have lots of but the run software need to be on your DVRs software which it’s not … I use them for windows machines
you could also try. G10s air mouse
you will find them on Amazon $10
but if your looking at making the operation quicker than mouse they won’t ….. it just replaces the mouse
-
1 hour ago, ideas said:so none of these other firmware would help
https://dahuawiki.com/FLIR/Firmware_P2P_Migration
or
http://dahuawiki.com/images/Files/Lorex/Firmware/
Well they’re not full firmware……. There just P2P updates to allow China server when flir sold there stake
but again software will also need hardware to make it new ….. if I remember 600 series is only 2mp and only h264
and again why are you taking hikvision ???? Completely different companythat’s like asking can I delete my windows 11 off my laptop and install macOS ( the answer is no)
-
Costco used to sell lorex refurbished units (returns)
in your dvr description you say on unit it’s a nr916n on bottom (900 series)yet in screen description it says LNR616 (600 series)
lorex did have a big problem in 2017 with 900 series……. Only 3fps not true 4K so all returns were refurbished to 2016 600 series
so as far as trying to upgrade your unit there is no firmware as now unsupported it is 7 years old so your unit will not have the hardware for you to update so can’t make it better
as far as using hikvision firmware …. Completely different company so will brick it anyway
lorex is dahua but again to old to flash as at the time lorex was changing owners
-
Hi this is the problem with smart cameras use once and can’t reset
the reset on camera is only to reset password but you can only get it via the email used to create the account
the camera only works on its China server once registered only those credentials can be used
people need to understand how these crap smart cameras work
-
Hi looks like you have a Costco reverb unit
started life as a 900 series but now is a 600 series 2016
what is the problem with it
-
9 hours ago, Raytechdesign said:the fan make a moise
Put in a new fan
that system has startup management (self check)
how long as it not worked for ?
software for viewing is on TVT website under downloads (no firmware)
if it’s important data just hand hard drive to police
-
58 minutes ago, Raytechdesign said:where i can ownlod the firmware the dvr is stuck in logo
Hi you won’t find a firmware that unit needs to be working to update the firmware
I would look at other problems ….. remove all cameras ….. remover network cable …. Remove hard drive then switch it on and see if you get the wizard startup screen also see if the fan starts up …… unit will not boot if your fan is faulty
have you had this system from new ?
have you tried using any firmware ?
do you know who supplied the dvr ?
TVT are hard to get software from I hold the firmware for all NVRs but only a few for DVRs Ai units
-
Hi who has the recorder now ?
did you burn off the footage onto a stick
is this home or business system
all systems can have problems if not setup correctly or maintenance not done which is a human error not recorder
is the court case against you
-
52 minutes ago, NavyBT37579 said:Too cheap to hire a professional, and also like the challenge to see if I can even do it at all.
Hi. You will be glad you cut out the professional as it is a big saving
systems of today are not like systems of the past it is now plug and play
the homework to do is the equipment don’t buy junk that will only last 1 or 2 years
-
It is much better to google hikvision ban
you will even read on china government watching hik cameras in uk government buildings
-
1 hour ago, Jase1971 said:why my systems would be having at least 10-20 illegal logins
Hi. This is not new with hikvision……. It’s been talked about for over 10 years on the forum
most countries are trying to ban hik
in your recorders log you should see an IP address of who logs in … can you post some
-
Ok once again the post of ATVcloud is a scam it was shut down years ago
use the iP instead of serial number and it will work
-
3 hours ago, Zed786 said:Thanks for reply. I already have xmeye but it just won’t work with this model of floureon.
What settings did you input on the app ?
-
1 hour ago, Zed786 said:Hi
anyone know what app I can use on a iphone ? I know ATVcloud works on android but just get it to download on iOs
thanks
It was band 2015/16 from iOS ATV cloud does not exist anymore your being drawn into a scam
you can use xmeye
-
1 hour ago, paulocesar1301 said:Hi folks!
Do you know how change firmware of Intelbras IZC 1003 to enable onvif or RTSP ?Hi ….. you can’t ….. there not part of onvif program
there just cheap smart cameras which are never good ….. you need there server to work
its cheaper to buy a cctv camera
- 1
-
30 minutes ago, Zed786 said:Hi it’s a Floureon h264 DVR with the standard cams that come with it
Ok so is the app not working or another problem
in your first post ATV Cloud has nothing to do with cctv it’s just a spam add
-
32 minutes ago, Zed786 said:Hi
i know this is a really old post but it’s the best I could find. The OP said he downloaded ATV Cloud for Android and that went through smoothly. I can’t get past this stage cos I’ve got an iphone and the App Store says it’s not available in your country or region. I’m in the UK.
any help would be much appreciated
thanks
zed
Hi what equipment do you have
Hikvision IP camera website streaming
in IP/Megapixel Cameras and Software Solutions
Posted
Hi does the router belong to you ??? Why do you not have access to it …… is the iP camera connected to it.
also it’s not that simple to live stream onto a webpage