Jump to content

Boxcleva

Members
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Hi , Yeah , it doesnt recognize the camera locally. It did do very breifly , but still didnt display pictures. When i tried to configure it , it would even accept the default username and password
  2. I previously bought a Video Webserver and even with help from a lot of people on here I just couldnt get the thing to work. Thinking an IP camera would be an easier option I bought a Aviosys IP Kamera 9060a. It comes with its own software and you supposedly connect it to your router (Dlink DSL G604T) and you can access it. Nope!! The software just doesnt recognize the existence of the camera. Here is what I have tried: I have set the Ip address of the camera in the same range as the router Have uninstalled / reinstalled the software several times Disabled ALL security on the Router , Firewall etc Disabled all security on my PC Reset the router more times than i care to mention Disbaled and renenabled DHCP setting on router. Am really losing the will to live with this damn thing its driving me crazy. If someone can restore my sanity I would be eternally grateful Thanks Box
  3. Boxcleva

    New boy needing help. AVC 732

    Thanks Rory , Have really screwed up now , I cant access my Linksys router at all , no idea what i have done. Have connected DLINK again so i can connect to the net. I'll try and get linksys up and running again tommorow and let you know. thanks for your patience
  4. Boxcleva

    New boy needing help. AVC 732

    Here a little more info , hopefully this will help Router IP - 192.168.1.1 PC IP - 192.168.1.3 Video Server - 192.168.1.150 DHCP Local DHCP Server is ENABLED Autodetect Lan DHCP Server is ENABLED Starting IP Address - 192.168.1.2 The DHCP attached clients table lists the PC ONLY DMZ DMZ is set to ENABLE , with a DMZ host address of 192.168.1.1 Here are some screenshots which I hope will help http://dialspace.dial.pipex.com/town/pipexdsl/s/asbw25/stuff/videoserver.JPG http://dialspace.dial.pipex.com/town/pipexdsl/s/asbw25/stuff/router1.JPG http://dialspace.dial.pipex.com/town/pipexdsl/s/asbw25/stuff/router2.JPG
  5. Boxcleva

    New boy needing help. AVC 732

    hmm, cant get this router to even see the web server in the LAN client list
  6. Boxcleva

    New boy needing help. AVC 732

    hi rory , its a adsl2 gateway , model No. AG241. cheers simon
  7. Boxcleva

    New boy needing help. AVC 732

    Ok , I placed an order for a Linksys ADSL Modem / Router today. Heres hoping i get get it working
  8. Boxcleva

    New boy needing help. AVC 732

    Same problem with the Dlink . God their interface is awfull ! So difficult to navigate. Back to the Netgear
  9. Boxcleva

    New boy needing help. AVC 732

    The only other piece of kit i have is a DLINK DSL604T Router. I will give that a go later on today and let you know how i get on. Thanks guys
  10. Boxcleva

    New boy needing help. AVC 732

    Heres the explanation for the block always bit (which you cant adjust) Any inbound traffic which is not allowed by rules you create will be blocked by the Default rule. BLOCK rules are only useful if the traffic is already covered by an ALLOW rule. (That is, you wish to block a sub-set of traffic which is currently allowed by another rule.) To define the Schedule used in these selections, use the "Schedule" screen.
  11. Boxcleva

    New boy needing help. AVC 732

    Telnet opens a new box , but no failure or success message , just blank. I have hosted the following screenshots. http://www.members.aol.com/huggy757844/inbound.JPG http://www.members.aol.com/huggy757844/outbound.JPG http://www.members.aol.com/huggy757844/overview.JPG dns addy - boxlceva1.dyndns.org Hope that helps. thanks
  12. Boxcleva

    New boy needing help. AVC 732

    Rory , I have enabled DMZ as suggested , and I have set the lan ip for port forwarding to 'any' and 'allow always'. Still no go. And yeah, I am using the 192.168.1.1 address when i try and connect with the server software.
  13. Boxcleva

    New boy needing help. AVC 732

    thanks Rory. That is all done. And if i type 192.168.1.1 into IE i get the screenb where I download the application software. But if i try to connect using the software it errors out. Also , when i type in my dns address from dyndns.org i get my router login screen coming up ???
  14. Boxcleva

    New boy needing help. AVC 732

    Ok , I've managed to chnage the IP , and the web server now shows up in the attached devices section of my routers setup pages. But it still wont connect ..grrr
×