ssmith10pn

Live or recorded remote viewing would be the only time the system consumes internet bandwidth.

H.265 NVR Embedded Plug & Play 4K NVR Up to 5MP Resolution for Preview and Playback 8/16/32-ch network cameras can be connected with 60M/80M/120M incoming bandwidth Support IP device centralized management, including IP device parameter configuration, information import / export and upgrade functions; H.265/H.264/MPEG4 codec decoding Support intelligent search, playback and backup functions, effectively improve the efficiency of video retrieval and playback HDMI/VGA simultaneous video outpu Support dual-os to ensure high reliablility of system running Support EZVIZ,IVMS-4500,IVMS-4200 2 SATA interfaces Support GB28181, Ehome protocol access platform. Notice: Please don't update this NVR. We have EU, UK ,US and AU Plug ,Pls leave the remarks when you place an order.

This is more valuable to me than UMD.

4 to 5 was easy. One camera license and you were golden. Now with 5 to 6 it's a cost per camera. ACC 5 to 6 Standard is 15.00 per camera MSRP. ACC 5 to 6 Enterprise is 30.00 per camera MSRP.

What delay egress Maglock are you using?

If they supported what you are asking of this camera it would pointless for them to offer Edge Series cameras and recorders. Their edge cameras have storage and ACC server on board.

Never mind I found it.

http://www.hikvision.com/us/Products_1_10561_i40907.html

Unfortunately the customer doesn't seem to see the difference between quality product and "crap".

It will generate plenty of heat on it's own. I would be more concerned about summer. I hard drive's life is significantly reduced if it is exposed to temps above 90 degrees. There is a reason why data centers are kept so cold.

https://www.hanawireless.com/enclosures

email me @ ssmith10pn@gmail.com and I'll give you my phone number in case you get stuck.

Ok so every thing will work with 24v DC. You need a 24v DC power supply 3-4 AMP should be fine. Don't try to overwhelm yourself. Just address one thing at a time. Inside and outside buttons look straight forward. Push to lock button is straight forward. Door contact is easy. Strike looks fairly basic.

You will need a power supply probably not supplied. Is your electric strike 12 or 24v? Fail Safe or Fail secure?

So relay 2 on on the CX-33 controller will land on A1 (Activation 1) of the door operator.

Here is WEC10

I assume this will be your application?

Links don't work. Please explain what your trying to accomplish. Do these restroom doors have a latch on them?

I wouldn't put too much effort into it. Auto tracking gets old really really quick. It's cool for a couple weeks but then you will end up turning it off.

Sounds like your password to the application is wrong. Totally different than logging into the device. I think there is a password reset in the IVMS software with the secret questions you had to enter when you set it up.

There is your answer.

I haven't tested one of these yet but I'm about to. https://digital-watchdog.com/productdetail/DW-CPUHD16/

" title="Applause" />

Do you have a gateway in the 172.x.x.x NIC? If you do remove it. Make sure windows didn't configure the 192.168 NIC as a public network.

Increase light is about the only solution.