SectorSecurity

have you tested your wireless network to ensure you have a strong enough signal for wireless to function properly? I am going to assume you have a single wireless router which isn't likely to give you the wireless coverage you need for a wireless system.

before you buy wireless check your network as it probably isn't going to be able to handle video to well.

you will need a hybrid unit to handle both Analog and digital or a nvr with encoders for the analog or a DVR with a video server to let u connect the analog cameras.

I would suggest skip the analog stuff all together and go nvr and ip cameras.

if you are looking for easy configuration I would suggest simply buy an nvr and ip cameras

you would probably need to find yourself a riser card if such a one exist.

what makes you want to get the 5mp camera? almost all DVRs and nvrs do streaming via web and mobile phone now.

you mentioned specs but do you have a price range in mind? generally I don't recommend using your home computer as an nvr if u will be using it for other stuff.

That is fine, those will allow you to send the video over the existing coax, but you will still need to use a poe injector, those aren't going to do anything about power for you.

This is what you would need:

Camera > POE Injector > Media Converter

This will allow you to power a poe ip camera and send the video down a coax cable.

Why not just use the existing coax to pull cat5? Attach the CAT5 to the coax and pull.

Unless you know how to actually set up switching just go unmanaged, unless you have a need to create VLANS and trunks and advanced options like that.

Hi hope I can get some help to my problem,I have a dvr FVS-DVR616S PRO2 I have reset the password by pressing a small button on the mother board and am unable to access the ADMIN screen now ,the user pasword os ok 1234 but the admin I have tried all the known variations (i think) has any body got a simalar model and can help or a user manual for sale ,thank yo for reading my problem and perhaps you can help.The password it must be 4-8 numbers .

Have you tried 111111 or 666666? Call the manufacture they should be able to give you the password.

I did a search and only saw one reference to the NVG510. Hope making a new topic will produce an answer.

 

Recently ATT switched my DSL service. I no longer have separate modem and Linksys WRT54G router that I can simply refer to the settings I saved on how I did enable the DVR to operate on the internet. The new unit combines the two functions into one box, a Motorola NVG510.

 

I'm using DVR WEB Client on Internet Explorer to view my cameras. But only get them locally. I'd like to see them from remote locations over the internet. The DVR is a 4CH model GS2008V. I plan to use no-ip.biz for a dns.

 

So far I tried setting Port 80, but using a online test, seems I have not even got that right. Anyone have experience using the NVG510 modem/router?

Have you port forwarded port 80? and try a different port I bet port 80 is blocked by your ISP to keep people from hosting web servers on residential connections.

Im currious, i have always used DC and it works. I found a deal on a used AC unit but dont want to buy it if the AC signal is going to put lines on the screen or something bad. I am using cheap cat5 cable.

 

Prinler

You have to use what is right for the cameras you are installing 12V is usually DC and 24V is AC, don't mix the two.

How much of the paper trail can be digitally stored that is acceptable in the courts.

Depends on what you mean by paper trail, most banks and businesses are required to store records for 7 years.

I had a power trip recently and now my H.264 DVR doesn't lists the Hard Drive, I have hooked the hard drive externally and checked its fine, but the DVR wont show it

 

What should I do? tried reset etc. but no luck

 

Thanks

I would say try reformatting the hard drive once you put it in the DVR.

Hi all, I have a problem with a video system and do not know how to fix it. It is a remotely controlled robot in which I use the same power to the robot and to the display. I use 30 meter UTP cable. By using the same power (same ground) I get the video to many interferences. If I see the video on an external monitor (different ground) I see very well.

Is there some method to eliminate interference when using the same ground?

 

Thank you very much.

You could try adding a ground loop isolator to your camera.

Im thinking I may give these guys a try, seems most have had a good expience, and I just checked the same camera at ADI was almost 250$ more, wont give product names or prices.

May work well for customers looking to save that are willing to wait, but for my corporate customers I will continue to use ADI as I like to walk in drop the broken equipment on the counter and say call me when the new one is in.

And my account rep is good looking too

You can not have a WAN IP of 192.168.0.100 this is a class C private address and is not internet routable.

use a website like canyouseeme to determine your external IP.

Are you sure the water is coming from the cable and not another source? Did you install an actual outdoor IP (IK I think in the UK) rated camera?

If you think it is hard now wait until we switch to IPV6

The 1/4" chip on that unit is going to give you a rather tight picture, if you are looking to cover a wide area then you should look for something offering a 1/3" or 1/2" chip for a wider picture.

I know of a couple cameras that would work great but they are about 5 grand for a full wireless setup with solar power and everything not sure what your budget is, but I am going to assume not 5 grand.

I dont think this would be possible. Not without somehow splitting the network cable carrying the POE into 2.

Try looking for an option to lower the remote viewing frame rate, it may be set to high and may be causing bandwidth issues.

Also note if this is a 24VAC power supply do not put 12VDC cameras on it.

And yes if connecting 2 cameras put both + wires on one side and both - wires on the other, don't mix + and - on the same terminal.

Never tried pushing it that far so I can't say, you could add a video quad in the shop and add a 'T' BNC connector to each camera, this would allow you to run the cameras back to the DVR and to the quad, the quad would let you output all 4 ch to a TV.

I don't see the need for the switch from RG6 to RG59, pick one and stick with it the whole way, no need to add failure points trying to go between the two.

Also I don't see why IP would be excluded due to internet, as it sounds like you are only worried about local viewing, which would be done all via your internal network so no internet involved.

As far as power are we talking 12VDC or 24VAC?

I have not tried using the BNC out through a coax splitter, should work, but using the coax in on the TV would require an RF modulator, use the RCA in (Yellow video port)

Do you actually plan to pan tilt and zoom this camera? Because if not you can go without a PTZ camera.

To send power over the ethernet cable you need a POE switch.

You will still need some form of internet connection and or NVR or DVR if you go analog to allow for remote viewing, else IP cameras would only give you local viewing over your network.

You have not mentioned anything about distance or planned mounting locations.

Really I think what you need is a punch clock or site supervisor, CCTV can work in this instance, but requires a good setup and probably more money then you are willing to spend.

FPS :frame per second (its important in recording and playback) real video :25fps

The important thing is Which OS support

I would say the far more important thing is how many FPS are being recoreded and at what resolution. By OS supported I take it you mean for remote access, this is usually based on the browser not the OS.

352x288 is CIF I believe, D1 gives you a higher resolution, think of it like your computer monitor, turn the resolution way down and the picture gets ugly, turn it up and you get a sharper clearer image.