joseph.chen0312

You could pick up gentec who is No. 1 but I have heard for poor sales rep support.

You could considering some spy gear for catching video as well as auido if possible. Because some country/area is illeagle for recording audio.

Some time key issue is not only for earth grounding but you also need to take care static-proof, you know some area is high dry to cause huge static.

You are plan to install isolaton is wise way and the brand is well known for high quality. Let me advise some opinion, you may also consider equip lightening arrestor/surge protector for more solid protection from lightening strike.

Also taking into account for use cable with STP for preventing from noise interferance.

You could check out ARC which lone history and who provides some solution as you desire. Most of important who has been long time testfy in the market.

There are some good products in the market, all is portable type so you could move to where baby are. I do not think you need use HD camera.

Their products is excellent in hazardous area and certificated in explosion-proof.

Or you could check does supplier has provide some dedicated viewer or CMS software which allow you remote recording.

Dear Al,

Sorry for late reply you. And it is bad to hear you get bad service. Actually, they are ask China factory made all line of products. RMA for China factory always is pain of ass to every one who purchased from there.

Lets leave it aside, as you stated you are happy new one camera but how it is for capture License Plate which you posted in fiest thread.

Would you mind sharing result if possible.

Cheers,

Al

As you stated, I think maybe you need to searching some cameras which built-in true Day and night ICR , OSD and RS-485 protocol which allow you remote function(i.e. Zoom, slow shutter...) via DVR. As well as, equipped Vari-focal Auto-Iris lens which will gaining better picture.

I have chekc those data and I am shure they are exaggerating spec. I believe they must deployed VGA(Normal CCD Sensor) and one stream compression ISP. And do you know how many cost for 1/2" megapixel it more expensive than that one camera.

Hi, everyone, this is my first post.

 

Do you find this problem? HD-SDI camera, is good at daytime, but at night, you can find the picture is a little blurred. f2.8~12mm Mega Pixels Lens, IR cut is build-in. People say it is common. And hope for more response.

Hello As you questioned, there are a lot of HD camera (CMOS) would be same occuring that phenomenon. But it involved and related to many factory. Not a simple words to elaborate all. Would you like to state main purpose you concerned.

Cheers

You could dispatch one active repeater at any edge then it could be reach 300m.

I think you may considering to dispose OSD vari-focal true ICR DOME camera at outside of your shop. It will providing better pciture when sunlight is strongly.

Yes there is the levels are selectable from zero to about 300

There is also a CNT option

 

Is there a ballpark to what they should be?

 

There is also a gain option from 0-255

 

I have a sheet that came with the camera I will attach shortly it shows the osd menu options

 

The camer has the AVS03a dsp if that helps

Hello I am also from Taiwan as you pointed AVS03a dsp , I am sure which items is made in China. Because here manufacturer no one developing that DSP but only in China.

Basically, Effio has E, Enhance E and P in DSP from SONY.

Hope it help you.

Hello

You could check all pages of main manual then you may could finding out those funstion you derserve. As for focus camera compliance I think it wuld be fine for both of DVR and camera has RS-485 or 232 interface and same protocol in Pelco D / P, If all is well it menas both could shake hand then you could condtrol via DVR, remote PC or some device.

As I know Airlive did not support Axis becasue Axis only offer protocol to big brand suchas milestone...

Hello

This is good stuff through from its spec. As you concerned, it abviously is for DVR as listed

"Standard Package Camera head with 18-inch pigtail cables for power, analog video, and Ethernet;

Joystick Control Unit; Operator Manual"

I also recommend you need to consider well mobile DVR with anti-vibration when boat face wave. When you done would you like to share us how it is.

Cheers,

It is reall excellent video at day time but do you have try at night time. As I know mostly is high noise at lower lux time.

If you have would you mind posting footage.

Cheers,

Hello Rick,

As you mentioned, but which type of camera, IR Dome or IR bullet? I think first off is you could see does glass of front case is clean or blurry if it clean remove front case to check surface of lens does clean if above one or both is foggy please clean up then try it may be works.

Hello

You could check pips and Genetc

http://pipstechnology.com/products/fixed_mobile_cameras/p362/

http://www.genetec.com/Products/Pages/autovu-overview-en.aspx

Hello

I think there are many items you could choosing on the market. maybe this one compam yyou could check http://www.safetyed.org/wirelessfloodlightcameraanddecoderoutdoor.aspx

Hi,

Maybe you could consider install floodlight camera

Hello

I think crucial point is not transmit video to decentralize spot but how make all 16 camera at 5 place in the loop for montioring.

First off, you could consider install spliter 1 in 4 out to other spot and central monitoring room and local palce you consider T connector install to each camera so one out to pliter and the other to local.

But I was wondering how to procession monitoring at 4 decentralized spot? you only mentioned two display but no PC or any device. Or you could complating deploye 4 DVR to eash side then you could watch on site live via montior and anothere is installing quad mixer to view the rest 3 spot or use an PC and view by CMS/VMS.

Finally, why you conduit fiber, if longest distance is within 1.5KM you could consider active repeater via cat 5/5e/6 to trasmit all video data. Becasue its more cost effective and install.

Cheers

First off, I think you check out detail in compliane PTZ protocol list to one video encorder/NVR you are intention to deploy. I remember PANASONIC is seems programmed dedicated protocol.

Then you could ask supplier offer or download manual alomost big brand has support detail pin code assignment diagram for instruction.

Cheers

Hello

I think it maybe is flare or IR bounce to sensor for where installed to closed wall or substance. You could offer some picture at day time for us view reall ambience.