jazzar

I can provide schematic type .DWG files using autocad.

Provide me with a rough sketch and the info you want on the site name ie project number etc.

Can do this in my spare time for a reasonable hourly cost.

Nothing wrong in physicaly masking off the area.

Vould use a camera that has privacy masking as a feature.

This can be a number of things primarily the security levels of windows 7.

In past i have had to set up active x to run as unsecured ie minimum restrictions to get the active x components to load

Also set ip address in as a trusted site.

Possibly use f12 on internet explorer and set to run im emulation mode of ie8 etc

And even set the ip address as a trusted site under java controls .

Windows 7 is most likely causing the issue.

Try googling each of the above.

Try googling monitor wall server.

These will do the task of the presenting video to the multiple monitors.

Available with different numbers of outputs from 4 to 16.

Maybe worth looking at.

see ptz setup on quantum menu:-

http://www.owlsecurity.co.uk/Quantum%20HD%20Manual.pdf

link the two wires on rear of the quantum unit. set camera protocol & speed on the camera unit probably via dipswitches.

they should then communicate.

From manual:-

see attached to set the limits.

this any help:-

https://www.samsungsv.com/Download/SDS-P3040_User_Manual.pdf

pages 59 to 69 shows ports and DDNS.

ONLY USING PORT 80 FOR WEB BROWSER

4520 - 4524 For Tcp

8000 - 8160 For Udp

have you tried:-

http://qvisglobal.com/knowledge-base/support-section-manuals

contact info and download manuals

Once port forward service set up then set up

Firewall rule to allow access to the new service:-

see:-

https://kb.netgear.com/8219/How-to-setup-Inbound-Outbound-firewall-rules-on-NETGEAR-Modem-router-gateways

once done check if port is open via

canyouseeme.org

you usually have to create a new service with the port number and also allow it permission through the firewall.

use canyouseeme.org from a pc connected to your router - input port number to test.

Fan is for cooling. If you remove the cooling then the psu could overheat resulting in component failure of the psu.

there are some drives specifically designed for constant read write as opposed to a pc which will generally have a long rest period when you switch off and go home from work etc.

see;-

https://www.wdc.com/en-gb/products/internal-storage/wd-purple.html?cid=goog:ppc:phase2:wdpurple:ic:purp

western digital purple.

hi dude- you need to give a bit more info. for example if I hit you with:-

My car lights don't work - what fuse should I check- people wont bother - too vague and lazy.

get a sample of the good quality cable along with the spec and then google and research- quality usually costs money- you want a good %copper screening- you can get 90% or so with double screen etc for military, avoid steel centre core- should be 100% copper- a lot of cheap nasty stuff out there.

Samsung do an ip network recorder with built in Poe 16 channel unit- so you don't need a separate switch. If you use IP systems. Cost effective.

google spiral wrap.

have you looked at Samsung (Hanwha now) range.

you could mount the camera directly onto a box like this if doesn't look out of place on site, any psu's / connections can be fitted inside box.

see bottom of page on link for some alternatives.

http://uk.rs-online.com/web/p/wall-boxes/1112351/

quick google on 6 display monitors for pc , result:-

http://info.matrox.com/graphics/adw/video-cards/c-series/drive-6-to-12-displays-with-C680-graphics-card?ref=adwords&gclid=CL6dg9jd2M4CFcYV0wodBu4GwQ

will do 12 if 2 cards linked- awesome.

try this company and cable-

http://www.gemcable.co.uk/products/p3607/BT3002-LSZH-Coax-Cable/product_info.html

if you are still struggling with the connector you can buy some cheap BOOTLACE FERRULES.

Get the right size for the dvr pins and if you can attach a short stranded cable to it and gently squeeze the ferrule so it grips the wire while leaving the end of the ferrule round so it can be pushed on to the dvr terminal pin for your connection. add some insulating tape around to avoid shorting pins then just join the stranded cable to your cat 5 and then cable tie or tape the wires onto the chasis to stop them pulling out.

Its a rough fix but will work, - I have done this in the past with hard to get connectors.

These ferrules can be bought from stores like Maplin.- easy workaround/fix.

check out trendnet products.

ref whats a quad- google quad unit cctv and alao for example see:-

https://www.spycameracctv.com/spycamera/quad-processor-split-screen-cctv-system?gclid=COmbrO3gp8wCFUO3GwodxnkGvw

old tech but cheap and simple.

one of my guys mentioned it a few days ago and I checked out link:-

http://ipvm.com/reports/dm-end

purchase 4 quad units, loop the signals through the quads to the dvr, from each quad unit you will have 4 pictures 1 to each monitor.