Everything posted by BlueToast
I am looking for suggestions on weather proofing the connection of an RJ59 Siamese cable to an HD-TVI camera that is mounted outdoors. Specifically, I am wanting to know how you would go about doing this and what hardware you would use. Reliability through changing seasons and weather is definitely a must (I have learned from experience, aww, camera video feeds keep going out). Do you have any recommendations on how to get the video feed of multiple HD-TVI cameras on one building over an air gap to the other building? The distance between the buildings is less than 300 feet and there is pavement that prevents us from doing underground cabling. In further extension of question #2, the building in particular is a workshop garage for vehicle repairs. The need is to install a wall rack with CCTV power supply and UPS battery backup. What is the best way to do this factoring in cold winters (below freezing) and hot summers (upwards of 38 Celsius / 100 Fahrenheit), particularly in protecting the equipment from overheating and the elements? In general, how do you recommend installing [bullet] cameras outdoors? In particular, do you install bullet cameras directly to a surface on the building, or do you install the bullet camera to some sort of weather proof junction box? What equipment do you use? I am hoping for some photos of examples and/or product links that I can order online. What is an ideal mounting height for outdoor cameras where a ladder is required to tamper with the camera but not so high that faces cannot be identified? If you are running a cable through a sheet metal wall, what do you use to prevent the drilled hole from cutting the cable and how do you weather seal the hole after running the cable through? What equipment do you use?
BlueToast posted a topic in Installation Help and AccessoriesHello! I am looking for a PIR motion sensor that I could wire into our Hikvision DVR. This motion sensor would be for monitoring a gate that is 75-90' away from where the sensor would be installed. From the point of intended installation, 90' makes it to the hinge of the gate (it is a swinging/articulating gate), and either 75' or 80' to the opening point/where the gate is locked. I want to cover the whole gate plus some. I have sought high and low for a PIR motion sensor and am having difficulty as the ones that would work are not rated for outdoor use. For example: the https://us.boschsecurity.com/en/products/intrusionalarmsystems/detectorsandaccessories/motionpirmicrowave/motionpirmicrowave_products_54110 - Bosch DS720i Long Range TriTech PIR Detector (10.525 GHz). The location of installation is underneath 4-6' of roof underhang. Rain does not reach this part, but fine mist with wind might. Snow fall would not reach this spot. I am not a professional but an amateur doing this the first time and enjoy challenges, learning, and DIY. I would like to learn more about this. I appreciate any help and advice that can be offered.