shanekennedy

i've switched to all digital cams so no longer need the board.  https://www.ebay.com/itm/Geovision-GV-900A-8ports-video-audio-DVR-NVR-digital-ip-camera-connectivity/293051456243

you can still use round-the-clock under scheduled recording

under the configuration-button -> system-config -> startup, set auto-monitoring to schedule-monitor

then under the schedule-button -> edit-schedule, create a schedule & set the monitor-invoke drop down to round-the-clock

minor issues, but so far so good on win8 running on a dell xps8500

geovision did break the cpu graphs in task manager causing them all to show 100%, you can see the true cpu utilization looking & the details tab of task manager & watching the system-idle-processes counter. i reinstalled windows & got graph working again, but immediately after installing geovision again, the graphs broke.

also couldn't access the webcam server after enabling it. had to go to windows firewall, delete webcam svr & http server, then add webcam server by specifying the path (c:\gv-900a\webcamserver.exe in my case) & enabling both public & private nets. the issue may have been having firewall rules for both webcam svr & http svr. so deleting the http server may have done the trick.

got a new pc on the way that comes with win8

& debating on reinstalling win7 since i know it runs geo well

Computer Case: dell vostro 420 tower

Power Supply: ?

Motherboard: ?

CPU: intel core duo E7500 2.93ghz

Memory: 4gb

Video Card: ati radeon hd4350

Hard Drive: multiple sata drives

Optical Drive: ?

Cooling: ?

Monitor: viewsonic va2323wm

Operating System: win7 64bit

Service Pack: n/a

GeoVision Card: gv800

GeoVision Software Version: 8.3.4

Screen Resolution: 1920x1080

Video Size: 800x600

Motion/Continuous: motion

FPS:

Environment: bedroom

Length of Tested Period: 3wks

Any other notes: also successfully ran 8.3.3 w/vista & 3gigs mem for several months

if not, if there freeware out there that can perform the task?

i run geovision @ home on winxp

you can view/control software via geo remove software, web browser or windows remote desktop

i have a gv-800 running v8.2 & would like to add a non-geovision ip camera

do i need the dongle mentioned in the above post

do i need an additional dongle for additional ip cameras

if multiple dongles are need for multiple cameras, would i still need a dongle if i used a GV-VS02 (D/A video server) instead

the change to the schedule config did the trick

many thanks for you help

register motion event was disabled

however, email was enabled under scheduling, that might be the secret

i searched every crook & crevice under configuration button, never considered options under schedule button

will let you know how it goes

thanks

invoke-to-send-alerts under monitor-control was already turned off

under the general tab under send-event-alerts is where i have enable intruder-event

for intrusion, i'm using

configure->video analysis->counter/intrusion alarm setting->configure->alarm tab

so when an object passes from zone 1 to zone 2, an intrusion event is triggered

this works fine & emails me the alerts

problem is, i get email for every motion event also, i just want the intrusion emails

new blackberry bold(9000) supports 3g & wi-fi

mine streams live audio/video from geovision w/o issue

would like to receive emails for intrusion detections

but not for every motion detection

can this be done

think i found my problem

it appears you can only view a scheduled camera during it's schedule

so i can only view my cam3 between 21:00 & 08:00

if i try to view @ 20:00, i get the "no privlege" error

is this a bug or a feature ?

is there some way to remotely view the camera 24 hrs a day, but only record between 2100 & 800 ?

i'm getting the "no privlege error" using remote-view & webcam view

doesn't appear to be a acct/password issue. when i turn off scheduled recording, it works

i have 2 schedules, & both have the "view" box checked

schedule 1 is for camera 1 & 2. they both work w/ remote view. it's on motion-detect all day from 00:00 to 00:00

schedule 2 is for camera 3. it doesn't work w/ remote view. it's on motion-detect from 21:00PM until 08:00AM

the time & camera #'s are the only difference in the 2 schedules

any suggestions?

just replaced my Osprey cards & GotchaNow software w/ a GV-800-8

man what a difference

was wondering what crafty ideas you home users have come up with to utilize geovision's rich feature set