Jump to content

wisp_engineer

Members
  • Content Count

    79
  • Joined

  • Last visited

Everything posted by wisp_engineer

  1. wisp_engineer

    Speco Intensifier

    So I am working on engineering a 5 camera system for a large cold storage area. This will be my first cold storage job so I am really lost. I looked at some of the cameras from Slientwitness here that you all have raved about but the price tag is a bit high and while they are good I think it might spook the customer. I called ADI system engineers and explained what I need: varifocal lenses, cold environment operation, and something that can work in the lower light levels of a cold storage cooler facility. The customer also requested that whatever cameras we pick, deliver clear and sharp images. ADI suggested I use the Speco Intensifier series.... This particular model: http://207.56.187.246/cart/products/productDetails.asp?prodID=942 Does anyone have experience with these? I have seen mixed feelings here about Speco products so I am really hesitant to offer these but the guy at system design said they are quality. I suspect they get a large kickback from Speco though, as everyone there raves about their products.... Hmmm He also suggested a DVR from Speco.... Not sure on that one. Suggestions or comments?
  2. Does anyone here have good/bad experience with Toshiba IP cameras? I see the IK-WD01A is very low cost which may fit a job I am looking at. How about other low cost alternatives instead of Toshiba? I have seen Acti but I am leery about them, and their prices are generally more (but I guess it is all relative).
  3. wisp_engineer

    Cable question

    So perhaps the Value Line is acceptable for indoor installations, but when running wiring outside where it may be exposed, one should either put it in conduit or use the premium line?
  4. wisp_engineer

    Cable question

    Anyone here ever use the Genesis Value Line series of rg59? It is pretty low cost compared to the Genesis Premium rg59. I can save almost 22 bucks a spool (500ft) by going with the Value Line. I called the dist. and asked him what was the difference and if it was all copper construction and he said yes, and he is shipping the stuff like mad and has had no issues. Any thoughts? What are the typical brands everyone here uses?
  5. wisp_engineer

    Panasonic WV-CP484 vs WV-CL924A

    Does anyone have pictures to show comparison between the two? I'd be interested to see how big of a quality difference there is.
  6. wisp_engineer

    Cable question

    Thanks for checking.
  7. wisp_engineer

    Small city surveillance - with Motorola Canopy

    I know this thread has been quiet for a while but I came across this while looking through my documentation. I saved the file a while back to my workstation so I have the actual link here. It discusses using the Canopy system for CCTV purposes. http://motorola.wirelessbroadbandsupport.com/fp/downlink.php?id=3621ea6a3a8ed0425754dcb794b7222d
  8. wisp_engineer

    Toshiba IP Cameras

    They are about $500 a piece list price. I am not going to disclose wholesale.
  9. wisp_engineer

    Pelco IS110 Series vs Panasonic WV-CW484

    I've never used the 484 dome but have used the 484 box cameras and they are amazing. I am expecting the same results from the domes.... I have a few job estimates pending PO's and they have 484 domes on them.
  10. wisp_engineer

    Panasonic WV-CP484

    Just thought I'd sing the praise of these cameras, as if it has not been done enough before. I just did 3 of them today, one inside a very bright entry lobby, two outdoors. Amazing, and i mean it, images. The customer was blown away. Also added a Honeywell vandal dome, and for the price the images were awesome. It was very reasonably priced. Replaced: Pelco Color camera (black box cam, color only forgot the model) Toshiba IK644A Accurate (who makes this?) (forgot the model, looks old though) Many shotty made BNC connectors Added: 3 CP484's 1 Honeywell WDR vandal dome
  11. wisp_engineer

    Small city surveillance - with Motorola Canopy

    I think Canopy would be a great choice. I've designed a few CCTV systems using it. If you want a reliable, robust network that has near zero downtime then I would use Canopy. If you can tolerate some outages and are willing to troubleshoot issues, then use lower cost 802.11 gear. What kind of non-line of sight do you have? Trees, buildings, hills? Canopy 5.4GHz OFDM would be the best option for PTMP NLOS and nLOS systems, depending on your required throughput and the environmental issues you are battling.. The most recent CCTV system I planned uses 5.4GHz OFDM stuff, but the furthest SM is around a few hundred yards. For a multi-access point canopy system to work properly you will need to sync them together, or use a CMM. No ifs ands or buts about it. No sync, and you're going to be battling yourself due to self interference.
  12. Isn't it funny that the people that theoretically SHOULD have the money and the wherewithal to know that they need to spend money on something like this, are the biggest tightwads?
  13. Gotcha Yeah I saw the cheezeball cams but I didn't know if you actually sold those to him or not and was not about to chastise over that one
  14. Nice write up! I'd kill you though if I caught you dremeling out a soffit on a house like that. LOL Did you put some wood patch on it and then repaint it too? It might have been just as easy to install a surface mount single gang jbox on the outside before you have to pass over the two 2x4's and then use a gland nut to pass the cable into the jbox. Nice work otherwise.
  15. Here is a new one for me, the customer says that they have a couple of cameras that "white out", their words, intermittently. The viewer said she saw the camera being viewed go completly white, and then back to normal image. Any idea? I would guess bad camera. I think all of these cams are Pelco WDR's. The system has been in place for about 5 or 6 years now and the company that was servicing the customer never returns calls or shows up.
  16. wisp_engineer

    Cat 3 vs Cat 5 Cable ???????

    That is correct! Any time you use cable in conduit that is buried you should always use direct bury rated cable with either flooding jelly or some type of waterblock tape or powder. Water WILL find its way into the cable.
  17. You cannot expect facial recognition unless you have an up-close shot. Not going to happen. Those areas in the shop make me concerned. What happens when the bay doors open up? You get white out. Good luck seeing anything then. Did you put a wide dynamic range camera in those areas?
  18. wisp_engineer

    16-channel DVR suggestions

    Does anyone have any suggestions on a 16-channel DVR from any of the major manufacturers? If I call my distributor they obviously are going to try and push the Honeywell stuff (which is not nessisarily bad but yeah) so I am curious as to what else I should look at. Some of the DVR systems from Sanyo and Samsung GVI look nice but I have no experience with those.
  19. wisp_engineer

    WDR Vandal Proof Dome

    Thanks! Actually I also looked at the Ganz unit. It seemed nice but with the reviews that everyone here has given on the 484 units I figured I probably should get those. Do you or does anyone have any stills from a Ganz WDR?
  20. wisp_engineer

    WDR Vandal Proof Dome

    I have been doing some research on WDR cams for outdoor use to deliver best - quality images during the day and at night with IR illumination. I see the Panasonic 484 is referenced a lot here by everyone as their go-to WDR box, but does anyone have any go-to WDR vandal domes that would compare with the 484 in terms of image quality?
  21. wisp_engineer

    Cat 3 vs Cat 5 Cable ???????

    It's ok. Neither have I... I understand the concepts of transmission systems though. We run all kinds of things over 25-pair like audio, control, data, etc. Video really is no different other than it is just a higher frequency and a different form of modulation. I'd never hesitate to use baluns though. A lot of devices actually have baluns built into them, you just don't realize it.
  22. wisp_engineer

    Cat 3 vs Cat 5 Cable ???????

    Where are you looking to see it is really untwisted? If it terminates at a 66-block you can bet it is going to be fanned out and untwisted quite a bit. If you were to take a couple of feet of 25-pair CAT3 and remove the jacket, you'd see it was twisted just as much as your regular 3-pair CAT3 drop wire. I know ADT has no issues running VID and PTZ control over CAT3 as I went up to bid against them on a job. They were going to use baluns to connect the PTZ to the DVR. Both were separated by some distance.... The only common point was the 25-pair cable running from one end of the factory to the other. My only concern is you might get some noise issues from the POTS pairs in the cable. Are these digital phones or analog (POTS) phones?
  23. wisp_engineer

    WDR Vandal Proof Dome

    Well I'm working on estimating a job. Our price is not so bad, its still over 500 bucks though. Once you tack on margin.... it puts the hurt on.
  24. wisp_engineer

    Cat 3 vs Cat 5 Cable ???????

    CAT3 for sure IS twisted. The twist rate however is much lower than that of CAT5 or higher Category ratings. Old phone wiring is NOT twisted, meaning station wire such refered to as JK wire. It basically is like 2-wire home theater wire, where you have two PIC wires inside another jacket. I wouldn't suggest using JK for anything anymore these days as you are not afforded the noise cancellation features of CAT3 or higher cables. 25-pair phone cables are at a minimum CAT3. You can purchase 25-pair CAT5E cables as well but I doubt that is what you are dealing with. Most likely you are looking at 25-pair CAT3.
×