cycattani

Here is the layout: Speco 8 channel DVR with video BNC out and VGA

out. I selected to use VGA monitors. Two of them, one at the DVR and

one at the cash register. The greatest distance is 25 feet of cord which

is a 15 pin VGA monitor cable. The monitor cable at the DVR is 3 feet.

That is the installation. The monitors are Computer monitors not BNC

security monitors. Cy Cattani

we install all types of cameras, DVRM's, illuminators etc, but we are not great with remote view devices. So know nothing about IP installation type cameras. So how do you hook-up and what is required as far as it is tied to a broadband connection or what, is a router required. What is required by my customer, what service is he or she required to have???

how are these cameras hooked up, what is needed. Please a short step by step explaination. What is the jacking or plug requirement etc. ???

Can we use instant messenger to discuss a topic?? Or do we have to wait for someone to diside to reply hours later.??

What cameras gave you guys the best results when a total darkness

situation arises? Someone is using my customers Trash Dumpster. Black and white is fine.

In any case Rory, how do I improve the quality of the VGA picture. I am adding another 15" Lcd display at the customer check-out and am going to use a VGA splitter and I understand it has an amplifier built in. I have not installed it yet but will the next installation at this site.

what do you consider the speco tn-8 series?? is it a stand alone or is it or

is it considered a computer based??? Cy

I used a speco tn-8, series dvr with a vga output to a computer lcd display and getting a poor quality picture. Do the resolution have to match both the dvr & monitor. It is not a security monitor it is a 19"

I noticed another alarm company using LCD monitors instead of CRT type, the picture on those monitors are good. I see them now being used in malls and 7-eleven stores etc. Their picture quality is three time the quality of my system, why?????

What is anyone using as far as equipment for remote cctv viewing.

The Falcon uses MPEG-4 compression which has three times the storage

as most of the cheaper brands. I was up against a competitor who used

the Falcon and the quality was much better than the unit I used. Also

the Falcon was able to be adjusted for lighting during playback and gave

more frames/second for the same speed I used on my unit. Buy it !!!!!!!

What is the prcedure to view remotely 8 cameras using static or dynamic

telephone line or DSL line or what? What connections are needed from

what to what?

what does IT stand for? or IT department

I've come to the conclusion that MPEG 4 is the best compression technology

so far with the least storage space. Is this correct????

Yes they are in business, pro-Video and Speco are the same company and available at ADI

how do I get to get into Dealer forum???? Cy Cattani

Over-all, dollar for dollar, what are the three DVRs' that most of you guys

use the most? I have been using the CCTV Cameras Direct and the

4 channel and 9 channel units with no name 160 GB but they run out of

storage or I get only 10 days tops using 4 cameras at basic resolution

I am tired of making the wrong selection and want to standardise at the

lowest outlay of cost with max comprssion. I think its termed M-Peg4?

What is the differance between all the speed and storage capacity or the

compression, for example JPEG, M-PEG, M-PEG4, M-PEG1, M-PEG2 and

M-PEG3? Which one is good, better, best etc.?

What equipment is needed for a 4 camera system to be viewed on any

browser or laptop computer remotely. Cy Cattani

I'll be there. Cy Cattani

I have a customer who wants to view his store on a Laptop. He has four cameras and I don't know wether or not to sell him a 9 channel DVRM.

What is the equipment in total pieces so he can view from any browser?

Cy Cattani

Rory: I was down the bahamas 4 or 5 times, How is it down there now?

In 1991 I think I stopped down to your place to discuss the "CAT"

tamper switch for bell and siren housings. I am the inventor of that

switch. I since sold it to Miricon Security. We gave GRI an exclusive on

marketing it back in 1989. We stayed on Paridise Island everytime and

once in the Grand Bahamas. Cy Cattani

I used a dvr generic brand from CCTV Cameras Direct, a 9 chanel but only using 4 cameras. I can only get 7 days recording time. A competitor gets

23 days using a Falcon 9120. I need to get equal or more days. I am

set on basic quality and 4 ips. This equates to 1 ips per camera. I am also using motion alarm recording. The chart says on basic and 4 ips I

should be getting 15 days. What to you think of the Falcon and what is

the type of compression use by ATV Falcon???

I have a customer who is using " Halide Metal white Light " type of outside parking lot lighting. What effect will this have on camera picture

at night ? This is a black and white system with a DVR multiplexer ? I am

getting ready to change cameras from Panasonic wvp-134 which is .08 lux

to a .0003 lux camera, but am concerned about the Halide Metal lighting.