jackbauer6 0 Posted July 23, 2008 Hi guys, I've got 2 PC working with Kodicom 880 cards, and Diginet Site V. 4.16, connected to LAN. I monitor them from ops. room with dedicated PCs, one for each DVR. The problem is that, at the beginning, it worked just fine, but then started to disconnect form server, showing an error message, and the only way to reconnect is to close DiginetCenter (after close windows says it crashed), and open again & connect. But from 5 to 40 minutes later, the error message saying that the software disconnects reapears. I've reinstalled Diginet Center and same problem. I hope you can give me some guidence on this because I have no idea what could be. Thanks Share this post Link to post Share on other sites
jackbauer6 0 Posted July 24, 2008 bug in the remote or server?? Share this post Link to post Share on other sites
mindware 0 Posted July 28, 2008 I think it's a fault in the DigiNet Client on v4.1. I had a similar issue. I've got DigiNet Server 4.1 running on 3 box's, but all being monitered through DigiNet 5.1 client's and so far we've had no problems. Of course, by doing this you might aswel upgrade the servers to 5.1 too (Which I plan to soon ) Share this post Link to post Share on other sites
kalpesh_nikumbh 0 Posted July 29, 2008 Many be the Patch of the s/w is diffrent try using equal or higher version of patch If it is not related to Hardware...& your Lan....then surely will solved ... Kalpesh Nikumbh India Share this post Link to post Share on other sites
