Neutech 0 Posted August 21, 2009 Anyone have the Firmware to upgrade a Digiguard DG1648 UK ? I know its AVTech DVR but i cant find it anywhere I also know its a "grey" area but i do know how to install and upgrde Firmware Thanks Share this post Link to post Share on other sites
kuocyj 0 Posted August 28, 2009 digi gurad DG1648 = cpcam cpd537 u propably can find some cpd537 firmware on google. Share this post Link to post Share on other sites
scorpion 0 Posted August 30, 2009 Most DVRs do not need to be upgraded. Firmware changed alot, and that was for Vista, and the newer DVRs should not have Vista issues. Do not change the firmware unless you are a dealer. There are several different versions of a firmware, and there are different boards. The newer DVRS will look at the firmware, and will refuse it if it is the incorrect one. The older DVRs will accept the firmware, and then appear "dead". DO NOT DO A HARDWARE RESET! You will need to try to reload the original firmware. It will cost alot to have the firmware reloaded correctly. It will cost about $150 - $300 for the service. Why do you need the firmware? Most problems cannot be fixed with an upgraded firmware. More then likely you are trying to do something custom, or you need to take it back, and swap it for a warranty repair. What do you think? Everyone took the firmware off of our sites because of wrong downloads then people tried to sue for damaged DVRs, and none of us want to pay for a DVR that we did not mess up. It is tragic, and it only hurts everyone because of the very few. Share this post Link to post Share on other sites
