billeh 0 Posted February 22, 2010 We have a potential upcoming installation with 2 cameras being installed in a pool area that is very humid. Could anyone advise me on how best to protect the camera, and the connection from corroding, or the lens fogging up? We will be using vandal-proof outdoor cameras. Thanks! Share this post Link to post Share on other sites
ronbo 0 Posted February 22, 2010 as long as the heater works they should be fine i check a few the other week and was ok,, some external housings can be installed with wipers. and shouldnt get to much corrosion as there shouldnt be too much slt in the air which is why most housings corrode. Share this post Link to post Share on other sites
billeh 0 Posted February 23, 2010 We aren't using environmental enclosures... just outdoor vandal domes. the room is already quite warm and super humid, so im curious to see if anyone else has run into any issues in this type of environment.. Share this post Link to post Share on other sites
scorpion 0 Posted February 24, 2010 Depending on the type of camera then this may be your friend! http://www.rainx.com/Products/Windshield_Treatment/Original.aspx Share this post Link to post Share on other sites
