How to bid a system like this

[gtxkid 0]

15 camera system to meet regulations for a Dispensery

Colorado MMED Camera Requirements.

 

MMED will require different cameras for checkout and outdoor location.

 

Computer is required for recording and viewing with 19” DVR Burner or bigger monitor.

Site will require a PRINTER Color 9600DPI to produce a photo picture.

Samsung CLP620N - $600 (9600DPI is a large requirement, don’t think they know what they ask for)

Site will require a Computer Room not used for growing Locked.

Site will require a camera recoding Licensee $850 each 4 cameras one time. 10 cameras $1200, 20 cameras $2300.

POE Injector / Switch for 24 ports - $1000 8 ports - $500 To Power each Camera and will notify you if a camera looses link, a state requirement.

CAMERA IN CUSTOMER AREA MUST BE HIDDEN (shaded housing)

CAMERA MUST BE AT ALL CUSTOMER CHECKOUT STATIONS.

Must see clearly for 20 Feet of view.

CAMERA AT Weighing Station

Camera at entrance and exit.

10 SEC Min recording on Entry and Exit of Motion Detection Recording.

KEEP DATA FOR 20 DAY MIN.

 

SEC - 10 REMOTE VIDEO MONITORING AND RETRIEVAL

– The NVR or DVR system shall be capable of providing remote VIEWING via internet of both LIVE and Recorded Video.

 

Internet Upload speed 1/3 MEG 384k. Must have Static IP and login and control capability for MME.

Must have Battery Backup on Switch à powers cameras, and Computer must have Batter Backup.

will need to wire the cameras using CAT5E

19” Monitor

We will need TWO Battery Backups for Switch & Internet as well as the PC Recording Station.

The internet router must be programmed to give the remote viewing of live and recorded video.

We must DOCUMENT the camera location types logins and access and store onsite in a safe.

We must have a color printer to print the photo for MMED should they ask for it.

 

 

 

6. Automatic Voice Dialer Duress Alarm

8. Holdup Alarm

 

 

11. Monitoring means the process by which a Monitoring Company

12. Monitoring

 

14. Panic

 

16. SIA Control Panel Standard

 

Security Alarm System on all perimeter entry points and

perimeter windows

[tomcctv 189]

Hi bidding is the easy part. you have a spec for the job so now you need to plan what equipment you are going to use and price with your mark-up.

 

 

but you have many more questions to ask first. like the computor room ..... who builds that. it has to be secure steel door/ access control /

 

you also have alarms listed. are you licenced to do alarms in your state. if not you also need prices from contractors.

 

 

you would be better letting people know what equipment you are going to be using .... and put your price up on here and see if you are close to what is expected for this type of install,

[gtxkid 0]

Only looking at the camera end of it now.

Probly go 350.00 installed per camera.

Dvr 2,400.00

PTZ 1,800.00 installed

Little markup for Battery backup, balum's, Power Supply. and misl. stuff.

 

Probly 9,500.00 in material

[thewireguys 3]

Please move this to the dealer only forum.

[gtxkid 0]

How do i do that.

thanks

[tomcctv 189]

Only looking at the camera end of it now.

Probly go 350.00 installed per camera.

Dvr 2,400.00

PTZ 1,800.00 installed

Little markup for Battery backup, balum's, Power Supply. and misl. stuff.

 

Probly 9,500.00 in material

 

 

 

 

 

gtxkid. then thats your first problem ... the spec you have listed is for ip. (licence for cameras) are you talking $

[Soundy 1]

How do i do that.

thanks

You can't; a mod has to. But do you have access to the dealer forum?

[Campbell 0]

With under 25 posts... no

[6eJon 0]

You do not have to wire the cameras with cat 5e. You can use siamese cable for analog cameras. The cat 5e is for the network and for any IP cameras used but not a requirement.

 

As far as I understand, there is no requirement of a steel door for the security room. It must be locked with limited access though.

 

What kind of cameras are you going to use? I am working on a similar project. The state is requiring .1 Lux inside, .01 lux exterior, and .1 lux for PTZ (min. illumination). AWB and AGC is necessary as well. I am not finding many cameras that meet those specs and as far as I understand, min illumination values are practically subjective, meaning nothing from one manufacturer to another.