crow 0 Posted February 18, 2012 hi is the 18 awg wire on shotgun cable ok to use on a G3 samsung 27x ptz cameras or do i need bigger awg wire thanks Share this post Link to post Share on other sites
Soundy 1 Posted February 18, 2012 Depends on the voltage and current draw the camera requires, and the length of the run. Share this post Link to post Share on other sites
crow 0 Posted February 18, 2012 hi mate the cameras are 24v dc and they are the qvis g3 samsung 27x domes, the runs are on 1 of them 5 meters and the other 2 are about 30 to 40 meters cheers Share this post Link to post Share on other sites
tomcctv 187 Posted February 18, 2012 hi. qvis needs 24v and 2 amp at camera. are you running power to cameras from dvr location or camera end. Share this post Link to post Share on other sites
crow 0 Posted February 18, 2012 from dvr location on the 5 meters run but havnt installed the other ones yet ho far would you go using the 18 awg wire on shotgun cable thanks Share this post Link to post Share on other sites
