27901591 0 Posted December 8, 2012 Can any PLEASEEEEE help me with this... how do you make the auto scan work on a Honeywell vcl orbitor, I have a standalone h.264 DVR address 1 braud rate 2400 pelco D set on the DVR for one of the ptz cameras, the ptz functions works and also the presets work as well, I tried changing The baud rate to 9600 and few others but then even the presets or the normal ptz won't work. Would honestly appreciate it as it will save me a lot of money. Share this post Link to post Share on other sites
tomcctv 187 Posted December 8, 2012 Hi. It will depend on your dvr. Most now will control a PTA but only s few will allow you to store commands. If yours is control only then your other option is to also run a controller along with your dvr. This will give you problems if you use remote viewing and control of ptz. Share this post Link to post Share on other sites
27901591 0 Posted December 10, 2012 Thank you for the reply, so if i use a ptz controller i will be able to use the auto scan function (which is more priority than remote viewing)? im now using a samsung SHR-2042 which still wont allow me to use the auto scan. Share this post Link to post Share on other sites
