mondesat 0 Posted June 4, 2014 (edited) I have a DVR kenwood CHINA H264 PAS ACCESS password plz helps defult password http://www.topsee.co.za/2013/10/19/4ch-dvr/ http://www.kenwood-cctv.com/ chipset hi3515 arqcv100 cp0931333 1333-china Edited June 5, 2014 by Guest Share this post Link to post Share on other sites
mondesat 0 Posted June 4, 2014 plzz helps i test all pass 000000,111111,666666,888888, 123456, reset par pile memoire not work plz i have gors problem Share this post Link to post Share on other sites
rebel998 1 Posted June 4, 2014 I have an exact same unit with the same problem. Share this post Link to post Share on other sites
mondesat 0 Posted June 5, 2014 http://www.dhgate.com/store/product/4ch-h-264-dvr-standalone-cctv-dvr-recorder/162098066.html this exact plz any helps Share this post Link to post Share on other sites
mondesat 0 Posted June 5, 2014 bump.... please help Share this post Link to post Share on other sites
mondesat 0 Posted June 6, 2014 ¨PLZ HELP CHIPSETE HI3520D V 1.82 Share this post Link to post Share on other sites
mondesat 0 Posted June 9, 2014 plz give me the solution i have big problem Share this post Link to post Share on other sites
Hunter2k 0 Posted June 17, 2014 Make sure you have no power voltage going to the DVR before attempting to do this. This sometimes works and reverts everything back to its default settings. Method 1: Try removing the battery from inside the DVR for around 2 mintues and then replace everything back and power the dvr Method 2: Remove battery and power the dvr and wait until it loads.Once loading cycle is completed then power down and put the battery back in. Above methods do work aslong as the DVR does not have an internal eeprom usually a 24LCXX Share this post Link to post Share on other sites
milkisbad 0 Posted June 17, 2014 Try : 020818 or 519070 if it lets you login just go to user acct and change your password using that as your master pw. Share this post Link to post Share on other sites
rebel998 1 Posted June 24, 2014 This is what I did: Unplug DVR. Remove internal battery Leave unpowered for a few days. (Left mine for a week) Then install the internal battery and power up the unit. Username should be "admin" with "0123" as password. 1 Share this post Link to post Share on other sites
ramon 0 Posted April 20, 2015 Listo primero hice esto: algunos modelos h264 se debe presionar el boton esc se mantiene apretado, se apaga el equipo y con el boton esc apretado lo enciende , suena el pitido una vez en la segunda vez que suene lo sueltas y listo Despues presione 10 veces el boton con la flecha hacia arriba y te dice si quieres formatear el usuario y listo entre sin contraseña, saludos Share this post Link to post Share on other sites
phonerepairzneltd 0 Posted June 19, 2017 Dead Easy, Amazing Tool. Make sure NVR/DVR is connected to network and you know the IP of it. Open the reset tool, enter the IP and wait till message Reset Ok, then unplug NVR then plug back in. Wola, all clear http://support.hkvstar.com/file/ResetTool.zip Share this post Link to post Share on other sites
gameofmotor 0 Posted November 18, 2018 Hello all friends.. I Have UK-PLUS DVR with 4Port for cameras chipset is Hi3520 DRQCV200 CP1361512 1512 CHINA the board number of the DVR is HI3520D_v1.97 How to reset the password??? plz help Share this post Link to post Share on other sites
COCOLIZO 0 Posted March 13, 2019 Hola, tengo un dvr genérico chino, que tiene CHIP Hi3520 DRQCV200 he probado con todas las opciones que figuran en el foro, descargué 4 apps de super password, pero no pude ingresar. El cliente dice que de un día para otro dejó de funcionar la clave de admin que utilizaba. Que otra opción tengo para resetear el equipo a valores de fábrica? Gracias! Share this post Link to post Share on other sites
joe amara 0 Posted June 2, 2021 my client misplace he HVR HI3520 ADMIN PASSWORD Share this post Link to post Share on other sites