Jump to content
mortacci

960h Camera not displaying 16x9

Recommended Posts

I have recently purchased a 960h camera and it is suppose to be widescreen but it is not. The specs show 976(H) x 494(V) but when I connect it straight up to a 16x9 TV using BNC to RCA connector it becomes stretched. It's as if the camera is 4:3. I even connected it to an old 4:3 monitor and it displays 4:3 like the D1 format. Why is it not at 16x9?

 

Here is what I bought.

"http://www.ebay.com/itm/1-3-SONY-960H-Super-HAD-CCD-700TVL-EFFIO-E-NIGHTVISION-CCTV-SECURITY-DOME-CAMERA-/121451341137?pt=US_Security_Cameras&hash=item1c47106551"

 

If I want true 16x9 BNC camera, did I buy the wrong one? Which do I need?

 

Thanks,

 

Mortacci

Share this post


Link to post
Share on other sites

Translation: 960H cameras only display wide screen when connected to a 960H DVR.

 

Ok so I'm connected to a 960H DVR. Should an image of a person look stretched/fat? That is what I am getting.

 

Can you or anyone answer this question?

If I connect the 960h camera directly to a 4:3 monitor via BNC to RCA yellow on the monitor, what should I see?

A. 16x9 image with black bars on the top and bottom with no image stretching. (image of a person will look normal).

B. 4x3 image that is squishing the 16x9 image into the 4x3 monitor. No black bars. (Image of a person will look skinny and tall)

C. 4x3 image that cuts off the right and left sides. No black bars (Image of a person looks normal)

D. A normal 4x3 image with no black bars.(Image of a person looks normal)

 

I would think the answer would be B or maybe A, but I am getting D instead. Since I am getting D, I'm assuming that the camera is not 960h and it is D1.

Share this post


Link to post
Share on other sites
Translation: 960H cameras only display wide screen when connected to a 960H DVR.

 

Ok so I'm connected to a 960H DVR. Should an image of a person look stretched/fat? That is what I am getting.

 

Can you or anyone answer this question?

If I connect the 960h camera directly to a 4:3 monitor via BNC to RCA yellow on the monitor, what should I see?

A. 16x9 image with black bars on the top and bottom with no image stretching. (image of a person will look normal).

B. 4x3 image that is squishing the 16x9 image into the 4x3 monitor. No black bars. (Image of a person will look skinny and tall)

C. 4x3 image that cuts off the right and left sides. No black bars (Image of a person looks normal)

D. A normal 4x3 image with no black bars.(Image of a person looks normal)

 

I would think the answer would be B or maybe A, but I am getting D instead. Since I am getting D, I'm assuming that the camera is not 960h and it is D1.

 

 

First, you should have said that you had a 960H DVR. The image is going to look stretched on a 16:9 screen format, the image is displayed in pixels, and to cover a true 16:9 format you need 1280x720 native resolution coming from the source. But the change should be minimal. Your best bet is to take a pic and post it here so we can see what it is that you are looking at

Share this post


Link to post
Share on other sites

Attached are 2 photo snapshots from my DVR. One pic is when I set the DVR settings to D1 and then the other is when I set the DVR to 960h.

4x3.jpg.0c8cb1c6674073d2019ff632a0292a0c.jpg

16x9.jpg.dbac13071f43cf23391082adcd356d33.jpg

Share this post


Link to post
Share on other sites
Attached are 2 photo snapshots from my DVR. One pic is when I set the DVR settings to D1 and then the other is when I set the DVR to 960h.

Under 16:9 ratio, you set D1 resolution, under 4:3 ratio, you set 960H resolution " title="Applause" />

Share this post


Link to post
Share on other sites
Attached are 2 photo snapshots from my DVR. One pic is when I set the DVR settings to D1 and then the other is when I set the DVR to 960h.

Under 16:9 ratio, you set D1 resolution, under 4:3 ratio, you set 960H resolution " title="Applause" />

 

 

I don't understand what you mean by this.

Share this post


Link to post
Share on other sites
Attached are 2 photo snapshots from my DVR. One pic is when I set the DVR settings to D1 and then the other is when I set the DVR to 960h.

Under 16:9 ratio, you set D1 resolution, under 4:3 ratio, you set 960H resolution " title="Applause" />

 

 

I don't understand what you mean by this.

 

D1 resolution is 704 x 480, 4:3 ratio. if you display it in 16:9, the image of course will be stretched, 960H resolution is a kind of D1 resolution under 16:9 ratio, it's resolution is 960 x 480. But it have to display 16:9 ratio through 960H DVR.

Share this post


Link to post
Share on other sites

 

D1 resolution is 704 x 480, 4:3 ratio. if you display it in 16:9, the image of course will be stretched, 960H resolution is a kind of D1 resolution under 16:9 ratio, it's resolution is 960 x 480. But it have to display 16:9 ratio through 960H DVR.

 

 

I am aware of the resolution and ratios, however I am still getting a stretched image on a supposedly 960h camera. It must be that the camera is not a true 960h but a D1 instead. So I will return the cameras.

 

Can you or anyone refer me to a "true" 960h camera that is widescreen and not stretched?

 

Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×