nicoacosta8 0 Posted March 5, 2019 Hi!I bought a Longse 4 wireless ip cameras + nvr kit.Two of the cameras are properly assigned to the ip addresses 172.20.18.13 and .14. But the other two are added with the same ip .11 . So when I unplug the ethernet cable from the camera connected it keeps changing from one camera to the other.How can I change the ip of one of the cameras in order to be able to use both of them wirelessly? (Notice that the ip that allows me to use them wirelessly is different to the default ip of the camera)I hope you can help me.Thanks in advance! Share this post Link to post Share on other sites
Dan G 0 Posted March 6, 2019 Not sure what program these cameras use for changing the network parameters on the individual cameras however it is as simple as going in and changing the last numbers to something that is not used elsewhere in your system. Try something like 53 or some other oddball number. The mfg web site may have a camera identification program that you can download to identify the IP address of your cameras. Possibly, if they are rebranded major name cameras, the manufacturers camera identification program may work. Good luck with finding the correct program and the change Share this post Link to post Share on other sites
