Jump to content

build my own VMS server question

Recommended Posts

I have been using Geovision cameras and software for over 10 years now for my company and have a lot of experience with how the hardware and software however I do know Geovision can be flakey with some chipsets and hardware combinations...with that said.. I have a few servers that I had bought pre configured with wind 7 pro and now im upgrading them to window 10 since Microsoft will be pulling support for windows 7 next year...and the board that the company has been using in most of my newest builds, which are still good servers, don't play nicely with windows 10... Anytime you request a restart it shuts down....that particular MOBO (Asus P9D-E/4L) actually has no win 10 drivers in the support downloads...there is a workaround but if im going to buy a new board and build a system from scratch I want it to work good.. I wanna hear what works for you guys out there..

I know im going to use a Xenon E3 CPU and at least 16gb ram ...either use a 500SSD or maybe an M.2 depending if the MOBO supports it....and the MOBO needs to support at least 2 10/1000 Nics...but 4 would be great...

any suggestions on the MOBO....a long time ago the company I bought my servers from used Gigabyte MOBOs but they were bad about popping caps and dying...so far the Asus has been a pretty rock solid choice...just so many to choose from..



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now