Jump to content
Stef1

Help with problem new Dahua ptz camera.

Recommended Posts

Hello all,

 

I have a problem with a new camera i'm trying to install.

I have a cctv system with a Dahua NVR5208-P and 5 dahua 3mp ip camera's .

I have a new Dahua PTZ SD22404T GN camera that I want to add to the system, I took one of the old camera's of the wall and hooked the new ptz camera on the existing wiring but I can not get an image from it.... 

When I hookup the old camera I have an image but when I connect the ptz, nothing....

I reseted the camera with the button under the dome and did a restart of the nvr but still nothing... 

 

When I take of the dome from the camera there are some lights blinking on the board and on initial hookup the lens did a 360 degree rotation.

 

Can somebody help me with this ?

The previous camera's were just plug and play, I assumed this was the same ... 

Share this post


Link to post
Share on other sites

I would bypass the NVR and power the camera another way, like 110v supply or poe switch and see if that works. It may be incompatible with the NVR. I would also check with the seller of the camera on compatibility with the NVR.

Share this post


Link to post
Share on other sites

Thx for the advice, but I found the problem. I had to give the camera another ip adres for it to work ?  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×