Sony SNC-DH180 & SNC-DH210T not working

[khaled-masri 0]

Dear All,
kindly, I have Sony Cameras SNC-DH180 and SNC-210T not working.

• 2 cameras one SNC-DH180 and one SNC-DH210T they are ON without any ping or IP detected on the SNC TOOLBOX at all, no access no GUI, nothing, just the power and network lights is ON, I tried to factory reset them without any change, does they dead ? is there anything that I can do to fix them ?
• 1 camera SNC-DH180 detected by the SNC TOOLBOX, but when I open the GUI give me no screen, nothing at all like the picture below, I factory Reset the camera without any change, I tried to redownload a new Firmware but the process Failed like showed in the pictures bellow, I replaced the whole lens without any change, I replaced the network circuit board and didn't work also, is there any chance to save the camera or fix it or it just dead ?

Best Regards.

[tomcctv 187]

Hi. Your pictures look like a network problem

 

are you on a private network as your out of range for a standard LAN 

what is your routers local iP?

[khaled-masri 0]

On 12/30/2021 at 12:59 AM, tomcctv said:

Hi. Your pictures look like a network problem

 

are you on a private network as your out of range for a standard LAN 

what is your routers local iP?

Hello, I connected the Camera directly to my laptop, and also I give her a static IP, and I succeed to opened on the browser but it give me a white screen with no interface and without buttons, nothing just white screen as the first picture above.

I tried to firmware upgrade it fails, and its gave me the that error as the pictures above.