lennyw 0 Posted March 15, 2022 Recently replaced a old home system using Blue Iris with the Dahue NVR4216 and for most part all is working fine. My question is how do you set which cameras are displayed out the HDMI port in LIVE setting. Have looked at info on TOUR but I would like to set the VIEW 4 selection to continuously display camera numbers other than 1,2,3,4. I do not want it to cycle through them as Tour does. Manual does not really cover this. Share this post Link to post Share on other sites
tomcctv 187 Posted March 15, 2022 Hi. Drag and drop cameras move camera screen location by holding down mouse on image you want to move and drag it Share this post Link to post Share on other sites
lennyw 0 Posted March 15, 2022 (edited) Was not sure which images you were talking about but appears you meant do it in the Sequence Option in Main Menu as that seems to work. So Thank you Very much. After moving images as you described I have noticed that when I first switch to LIVE view that I have the four camera images I want but about an hour later I checked it and LIVE display had changed to just one image at full screen. Not sure why. Edited March 15, 2022 by lennyw Additional Feedback Share this post Link to post Share on other sites
