Luxriot Set up 4 IP POE PTZ cameras only 1 works.

[stealthrt 0]

Hey all. I have been trying to setup this Luxriot EVO free edition for hours now and still am not able to get it to display my cameras.

The first camera I added seems to have worked when clicking on the camera name and then clicking on Show video in the Channels section:

I created a channel for it called Cam Channel Group and placed the Cam 223 into it:


In the Monitoring tab when selecting the Devices menu I have a working camera.

And on the Channels menu I again confirmed I have a working cam:

Lastly on the Streams menu I have a good cam:

Ok great. I confirmed I can view the camera and that the camera is setup like it should be.

When I start up the Luxriot EVO monitor I am unable to find it ANYWHERE!

Nothing at all is listed under the Channels menu when, I would think, my Cam Channel Group should be listed?

If I go back and add a second camera it then tells me Unauthorized (401)...????

And the Channels menu in the monitoring tab looks like this:

I made sure both cameras had the identical settings via their web page and they do. I also tried my other 2 cameras just to make sure it wasn't a fluke but was greeted with this:


So this is where I am stuck. Any help in getting this to work would be great because I really like the program (What I can run on it that is))!

 

[tomcctv 187]

Hi what cameras are you using?

pic also shows your setting up as h265

[stealthrt 0]

1 hour ago, tomcctv said:

Hi what cameras are you using?

pic also shows your setting up as h265

They are your typical Chinese IP POE ptz dome cameras.

 

[stealthrt 0]

[tomcctv 187]

Ok your link has not worked

what make are your cameras and spec 

[stealthrt 0]

20 minutes ago, tomcctv said:

Ok your link has not worked

what make are your cameras and spec 

No name branded.

[tomcctv 187]

That’s a securplug ptz 

you need to change the software your trying to use 

I will send you a link …. Click on software download first …… then click on your camera model number for setup

 

[stealthrt 0]

1 hour ago, tomcctv said:

That’s a securplug ptz 

you need to change the software your trying to use 

I will send you a link …. Click on software download first …… then click on your camera model number for setup

 

But that doesn’t explain why one works when the other 3 do not?

[tomcctv 187]

Hi it does ….. are you using same info for each ptz

as that will only show 1 camera 

each camera has own name and port or a URL

 

also your using a free version of Luxriot 

which has a lot of limitations…. How many ptz will it support 

[stealthrt 0]

The free version allows 8 up cameras.  
 

and all of the settings for each camera are identical other than their IP address. 

[tomcctv 187]

12 minutes ago, stealthrt said:

The free version allows 8 up cameras.  
 

and all of the settings for each camera are identical other than their IP address. 

Hi yes it does but not 8 ptz cameras it’s free but limited

 

did you try the software I sent