protecvideo 0 Posted May 12, 2007 Installed a 16 channel GV-1240 about a year and a half ago. I hooked up 11 cameras and have been able to view all 11 over webcam flawlessly this whole time. Now when i check through webcam or Livevue only 6 cameras come up. All the others say STOP. I can pull up cams individually with no problem but not all 11. Nothings changed so just trying to see if anyone has run into something similar. I have tryed on 5 different computers to view this system remotley and each one only allows me to pull up six cam. Any suggestions would be appretiated. Thanks Share this post Link to post Share on other sites
vf702 0 Posted May 14, 2007 When we've been remote viewing some from one DVR and some from another, sometimes we have to hit the play button below the video to get it going. I have not experienced that off a single DVR though. Share this post Link to post Share on other sites
photys 0 Posted May 23, 2007 Major reason for this is that the cameras are webcasting with different codecs. Follow instructions below to fix this: Go to : Configure - System Configure - Camera 1 In the Monitor control section, click the second from last icon. Choose a codec, then hit the little finger icon to apply that codec to all cameras. Share this post Link to post Share on other sites
