rikky 0 Posted October 1, 2004 For for of our technicians I'm in search for a good and extensive description of the installation of a lens, using a filter, backfocusing, etc. Did anyone come accross such an explanation lately? Is there any online info on this item available. (Been searching within the websites of the lens manufacturors, but untill now no real help overthere. Tried also some CCTV books, but no real succes either. Hope some of you found something in the past. Thanks. Share this post Link to post Share on other sites
Cooperman 0 Posted October 1, 2004 rikky, Don't know if this will help http://www.doktorjon.co.uk/technical-lenses/lenstech11.html Share this post Link to post Share on other sites
AliB 0 Posted October 1, 2004 Here is our standard setup procedure. What do you need to know about filters? Standard Camera Set-Up Procedures a) Camera with Manual Iris Lens 1 Set the focus ring to infinity (far) 2 Set lens iris ring to f4 3 Set camera switches AGC ON BLC OFF Gamma 0.45 AES (EI) ON AWB Auto (Colour Cameras only) LL ON 4 Adjust camera focus for the sharpest picture b) Camera with Auto Iris (Video Drive) Lens 1 Set The focus ring to infinity (far) 2 Set lens iris P-A setting to Average 3 Set camera switches AGC ON BLC OFF Gamma 0.45 AES (EI) OFF AWB Auto (Colour Cameras only) Lens Video 4 Adjust Camera focus for the sharpest picture 5 Adjust lens iris level for correct whites in daylight 6 Adjust lens iris P-A to reduce blooming at night c) Camera with Direct Drive Lens 1 Set The focus ring to infinity (far) 2 Set camera switches AGC ON BLC OFF Gamma 0.45 AES (EI) OFF AWB Auto (Colour Cameras only) Lens DC 3 Adjust Camera focus for the sharpest picture 4 Adjust iris level on camera for correct whites in good daylight Share this post Link to post Share on other sites
