tomcctv

Yes power lines are not a problem. ... Try and spend as much as you can on them. .... Not all will allow for audio Use as many and you want or a good one and use a switch at multi camera end

The people you have sent them too will not of opened them.

Hi everything you need is in your PM box

Yes you should load onto each PC you want to monitor on Software is in your PM ..... The disk you have will be old software

THAT is $2.400 a year for 4 cameras ........... And look at your storage res limit .........ITS CIF why would anyone turn to your company who has say 2mp cameras and be limited to that size Waste of money. Cloud does not have to leave the building the NVR is at there are now many cloud drives like W/Digital that are small and be hidden well in the home or office $2.400 for 4cameras A Year $5.000 for 8 cameras A Year Both very low resolution It's much cheaper just to install 2 NVRs .......1as main other a hidden back up But take a look at a private cloud and only pay once for hardware

Hi. Depends on which qvis you have Dahua uses PSS software ... Try that first

Hi. Matt Yes cat5 is fine for PTZ data and also video as well

For 200ft you have no problem with what you use. One of these will work for you. http://www.veracityglobal.com/products/ethernet-and-poe-extension/outreach-lite.aspx

All NEC public monitors have 3 year warranty Also if this is for a customer then I would not use a domestic tv

Good old system the levi When you start and system is running you will have 3 icons at bottom click on gold key and enter passwords I have sent to your pm. This is a windows embedded system you can't get to operating system without a master code (engineer code)

Sent to your PM

Not a problem sending you firmware But what is your reason for the install of firmware ........ It does not change how you control it control is the same. 5 types of firmware for that dvr ....... A type c type with or without HDMI and CIF or D1. (Can't go back if load wrong one)

Hi. I would also look at avigilon for your store.and also there software. You know with avigilon you can install and leave . There software has some good options for your type of store .

Hi. You could use a hikvision encoder and just use that to record audio on NVR

BNC . T connector will not work but your post is a bit confusing but you have signal wire to every apartment for intercom. which camera did you use ??? does it have composite out ??

Been a problem with avtech for a long time Remove all remote viewing software from pc ...... Then rest date on pc to September 2010 once loaded and working the return date back on pc Oh and comparability mode has to be ticked while on 2010 date

hi. yes you can and with being a local network you don't need to do any settings just go into settings once all connected on your dvr then network and use the ip you see at top of page. you should get good local coverage with that router this is the app for your dvr https://play.google.com/store/apps/details?id=com.mm.android.direct.gdmssphoneLite&hl=en_GB

Well sorry I don't understand why you say it can't be done Lots of systems out there. But OPs system does not support POS so for text overlay to his system is to us a analog camera with encoder and that does give him text overlay from all types of text box

What can't be done with IP ??

Hi. your new to installs and the first thing is to look at laws in your state or country for recording kids. it sounds good for the daycare but its just going to be a headache for them. parents will end up controlling the daycare .........calling every 5 minutes ..... why is my child not in view .....why did that child push my child. off site recording by parents will be another problem. CCTV in schools and daycare is a good thing but only when used to protect and not put out to the public for anyone to watch. amount of connections ..... parents x 2 who then give link to grandparents x 2 Aunties & Uncles

Hi. There are a few ways ...... But I can't find any info on that NVR on 3rd party cameras or encoders You could use analog cameras at register area that way you can have pos then connect to NVR

Hi. are you connecting to a card ??? which make

hi. did you ask them to check price ??? before you do any work on a lift first request permission from lift company 9 out of 10 lift is in total hands of lift company (there own liability insurance). they could charge you 47k for them to remove your equipment

afafaplant2000. basic stuff first no contact details no address no phone number even domain check comes back with 999)999-9999 Tel (999)999-9999 [fax] I have a feeling people will waste money or just end with a headache they don't need.

Hi. The bosh is a very good camera .........as you see anywhere in Europe it's used a lot. However ..... It's your distance that is the problem and also for the money you are spending I think you would be looking for a good software for detection. Your budget gets you into avigilon class. Who already have port and costal software. Well worth talking to. Also as for lens type Pentax. http://www.ricoh.com/fa_security/security/pair/