tomcctv

hi. i have just checked on two dvrs via remote and it worked. can you put a mouse onto your dvr and try it ??? click number 1 twice withing 5 seconds and menu pops up. can you list firmware (under settings) if you have not done a firmware for a while a new one was out last week for the nanos

hi way to old for mac use. its a 6 year old unit ..... the updated is the dahua

that is only because your using segment ....... on all avers for 7 years you can only pick segment from a hour clip .......... so you cant go into 2 or 3 hours. go into backup and you can .......... or in backup you click hour block then click next hour block or hour block from another week. and remember on the hour block you can also righ mouse click and set the time of the footage needed. and again you can pick format before burning native. avi or dvr direct all of which also place auto player.

hi. i think images have been mixed up this is not 3mp cant read the clock on right had side (i have seen 1.3mp do better) i can read the clock on right hand side. snap shots are opposite to your first post vivotek AVS

segment is only for a max of 1 hour or parts of that hour ............ backup is the standard way to backup data and you pick from the drop down box on what format. backup can be from 1 min to full month and is the standard for evidence as is watermarked and electronic signature

why not just use backup instead of segment time ???

Yes that's the thread I started!! Anyway the seller has paid for the replacement base which I've managed to source. Now I just need to work out how to access the OSD menu using my Averdigi Nano DVR. I've another thread running about that so if you have any ideas I'd appreciate the input. hi. for all avers you pull up PTZ controls click 1 twice (within 5 seconds) and your into ptz camera menu.

Hi. andy click on PTZ controls then click 1 -1 within 5 seconds will take you into ptz menu

nathan. all verifocal need adjustment its fixed lens that dont. or auto zoom / auto focus

we. have 3 sets (got them free) spend so much with one of our UK suppliers and you get a set free. ideal for service engineers and job estimators ..... good as loft ladder

cameras have nothing to do with recording in cif or D1........ that is down to your recorder.

hi something to always carry around is a verible power supply. we use these good for 12v over long runs 1.500ft

are you running 12v over 365ft ??? (110 meters) and at what amp is your power supply. ...... you should be 5amp or over for that distance

hi. when you formatted the drive did you do it on the dvr or PC

hi. now set your dvr time and date shut down then reconnect your HD restart go to settings then format and see if that works.

hi. most of the time with a cnm is the format type. does your dvr startup as normal without hard drive attached ?

hi. with a budget unit you are stuck with what you have. this will be comming from your dvr. again you cant make it any better

hi. 15 year old technology to work on modern phone lines is a problem by its self. i dont know what part of the world your in but most have gone from analog phone lines to digital. is there a reason why you cant go broadband ??? much cheaper than paying for every call your current unit makes

save your money. that card is crap junk and not from your country. that link is CIF only. look for D1 and dont use ebay. we have a problem in the UK at the moment with people buying poor systems and cards from ebay from china. it does not work or poor quality

hi. another way is if your have a cellphone contract see how much the samsung note is. you system will alway be on were ever you go.

specs / books / manuals dont mean much. and its not the way to buy a dvr. look at what you need it to do. q-see is not full D1 (Elite) if your looking to use apps q-see use generic apps (not there own) so your limited updates are slow getting to q-see website (q-see dont make the dvr) its know as a TVT. who make for q-see/swann/cmn/killer. dahua. updates are direct from there website so are the manuals. dedicated apps (with a brand new one out (have control or dvr) one thing about buying rebranded units is finding out who the makers is. you then have a few options for updates and firmare/software. an other to look at is the aver hybrids. again dedicated apps / direct links to downloads/ free ddns service. and in the same price range.

hi for mac you will need to do a update on your units (DH200 only) http://www.digimerge.com/wp-content/uploads/2011/08/DH200-Digimerge-Touch+-Series_MANUAL_EN_R4_web.pdf

can you still get money for them ??? bit old hat now.

hi. i would keep my head down and not talk to your boss. i think you need a new calculator. all your listed parts come to more than $4500. DVRs and cameras not counting cable/ power units /monitors is $6.700

hi. i would delete your dyndns account and get your system working first on its external ip then once up and running then switch over to a ddns service