tomcctv

it may be best to let people know what your budget is. as far as i can tell from your limited spec. is you need more than a cctv company. you also need a company with a licenced for fire in that state. you may also find that any company you use. are going to want to work with the products they know. at the end of the day it is there company name that is getting used. you must have worked out some sort of budget with your customer. do you not have some drawings or anything just to see the size of job. 1 size of cctv system 2 size of fire detection system 3 door entry systems.

i would remove the card and then just do a system restore. looking at the card specs. i cant find one that says its win7. were did you get the card.

ok. try the oldist first. 92. but which ever one loads ... keep using that. dont try to upgrade to an other.

Is there a way to download the firmware when it is stuck on blue screen. hi. download onto memory pen . switch dvr off install pen into usb and start dvr.

there are 3 types of firmware for the 811. b94- b95 - b97. try the b94. firmware sent by pm.

Shutters and smokecloak would be my first suggestion. Ilkie Smokecloak looks interesting have you installed them before? Is it legal in the US? I could see the perp tripping and breaking a leg then suing the owner and installer.... which BTW it think is **** ridiculous thewireguys. you have hit it right on the head. we are a user of smokeclock. we (smokebandit) much faster and better. its been used in the uk since the 80s but got into problems with the legal problems. stupid laws like if the scum fall or break something while caught in the smoke. the owner is liable.. but there is a legal way around it now. i will send you a pm.

Hi did you manage to get your DVR to work. I just upgraded mine to firmwre 1.0.3b97 and now it does not work. When i power up I get the DVR H264 logo, then the screen goes blue. they have a warning on there website. FIRMWARE is not an upgrade. it is a fix only that if your dvr has problems. if your dvr is running without problems (do not do a firmware) firmware1.0.3b97. is only for use with the following models. US411/RVH1004/US811/RVH1008/US611/RVH1016. installing the firmware onto anyother model will render your dvr inoperable and will not be covered by warranty.

its going to be hard to setup in your area. you have the biggest distributor in europe. this is going to make it very hard for you to get good branded name cameras. asking people what they pay for cameras is not going to be much help. you have to be the same price or less. but then you have shipping. the company by you offers free P&p to spain. that alone saves £40 you would be best listing the type of cameras you intend to stock and your sale price along with postage costs.

Thanks SEANHAWG this information helped me nut till i have problem in zooming and turning rounf power supply is too small. what size are you using.

you have got to be joking. $8.000 for a 16 way hybrid. and then camera licence on top. support $50 month. sorry you say on your web geo/aver dont even come close to yours. you are going to have to explain why for that amount of money for your own brand hybrid. whos ip cameras do you support.

the concept is the only ptz we use . in 3 years sent 2 back. as for as connecting to your dvr. it is a direct connection. (on back of your dvr last 2 on the green strip are for ptz control) just set both dvr and ptz to 2400 so you have control over with moblie phone. only problem videcon are trade only.

Hi andy. avermedia touch monitors are good if used with the CMS software or the SA dvr/nvr but for the cost i would just stick with a good wide screen. i will post you a link to my supplier for monitors. £60 19in hanspree 5 years warranty.

sometime its best not to list your own company. like alot of people on here. they will do a company check first. its something i do anyway when looking for suppliers. you are showing up as 6 differant companys all under one name. all to do with cctv. not a good start.

hi still some of your settings need changing 37777 is TCP only. 37778 is UDP only. also remove your public port. who is your isp. and were are you based ??

I'm not sure what you mean by the picture doesn't fit. The output seems to fit the screen ok but the quality is poor. Is this what you mean by not fitting? Using a KVM is one option but would then involve a VGA to CAT5 converter. I've seen some monitors which have VGA input and a BNC output which could then be fed to the TV via CAT5 and baluns. Can you confirm that the quality of the VGA output should be as good as what I'm getting from the SPOT monitor output? yes the vga should be alot better. in the last month we have installed 14 of the nanos. 2 of which are on 32in monitors. do you have a large tv. just try your dvr in that see what you have. but you do need better than just a standard 17in monitor.

hi. you need a wide screen monitor with the nano. if you are just using a standard 17in then your image will not fitt. if you have a tv with VGA. you could use a KVM and split your output of your vga and run a cat5 to your tv that way you will have full control on local monitor and also your tv.

Hi andy. a good way is run your cat5 to the closest point to both your cameras. connect your baluns and use a coax patch leads with a bnc to bnc connector from your camera back to your cat5. so balun then BNC to BNC connector then a patch lead to each camera.

gtxkid. then thats your first problem ... the spec you have listed is for ip. (licence for cameras) are you talking $

Yeah I do what make dvr do you have... all the ports look ok on what you have posted you have a static ip (payed for) does your dvr have remote software ???

Yeah I'm not on site. On site (on the LAN) I can access the DVR via the Web Service and it logs in fine, it's just trying to log into it on the WAN where the problems start do you have a static ip address

I tried all 3 ways ...Http:// IP:37777 Http:// IP:37778 Http:// IP (80) The last one above produced the info message "Time Out" at the Web Service login page, the other 2 (37777, 37778) either didn't connect or produced the same message....I can't remember those 2 and for some strange reason all 3 are failing to connect now so I can't check?! Must be something up with the router are you doing this away from your own network.

OK I've done the above with the public port field left blank as in pic below (I know pic shows 37776 but has been deleted!) and now I get a new "Info" message when trying to login on the Web Service page which is simply "Time Out" http://s1216.photobucket.com/albums/dd366/eivissa85/?action=view&current=routersettings2.png I can't access the router remotely anymore as all traffic is being forwarded to the DVR, as you mentioned this isn't a problem as the only time it needs accessing is to sort this, which looks like it needs to be done on site anyway! Just wish I knew what it was that needs doing?! Is the "Time Out" message simply a slow connection? The Web Service page does seem to take a lot longer to load up than it did when login wasn't a problem, maybe a problem with the router?! Thanks again for your help! how are you loging into your dvr. Http:// your ip:37777

Hi bidding is the easy part. you have a spec for the job so now you need to plan what equipment you are going to use and price with your mark-up. but you have many more questions to ask first. like the computor room ..... who builds that. it has to be secure steel door/ access control / you also have alarms listed. are you licenced to do alarms in your state. if not you also need prices from contractors. you would be better letting people know what equipment you are going to be using .... and put your price up on here and see if you are close to what is expected for this type of install,

Hi if you are not using avers ddns then ports 53/1053 are no good to you. you need to portforward 5550 that is the only port you need open. who is your isp.

looking at your photo bucket. you have 2 ip addresses for your dvr .......... they need to be the same on your router your have 192.168.201. you need to change that to your dvr ip which in your post is 192.168.2.116.